Removed the screws holding the bail arm on, watch for a small washer on the trigger side. Removed bail and cross bar the bail attached to. Removed the whole spinning housing by sliding off the central post. Cleaned and greased operating parts. Keep in mind there are two very small detent springs. One is placed in the white spacer which ha
... Read mores a designated placement between two body posts. The other spring is tensioned by a separate body post. Replace spinning housing, removed side cover on trigger side to access auto bail close arm and spring. Pull this out and replace new parts the same configuration as was found. The small pinched side of the spring is the side the black auto bail trip bar goes in. Put back on side plate with two screws. Replace quick fire parts by two screws. Bail goes back on with one machined metal thread screw and one plastic thread screw. Grease all your parts after cleaning, including the mating faces of the new quick fire trigger parts, allows for easy break in.
Removed bail, bail arm, bail spring and spring guide. Used grease to hold spring guide and bail trip rod in place. reinstalled new bail arm assembly and then the bail spring. Reinstalled bail.
I\'m not super mechanically inclined but once I figured out where the bail spring guide was supposed to go (right under the bail flipping mechanism)it was a super easy fix. Used a screw driver to remove old parts and replaced with new ones.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
