Part Location Diagram of 105B2 Shimano Anti-reverse Cam Spring
See part 1520 in the diagram
( Grid squares measure 1x1 inch )

Anti-reverse Cam Spring 105B2

Manufactured by:
Shimano
ERP Number:
ERP18247096
Part Number:
105B2
Original Equipment Manufacturer ?
  Works with your model  IX4000R!
Special Order
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  Works with your model   IX4000R!

Product Description

?

This authentic part is supplied by the original equipment manufacturer for use with Shimano fishing reels. The spring applies tension on the connected parts. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this anti-reverse cam spring.

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Spinning Reels

Customer Part Reviews

?
1.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    0
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Friction ring disintegrated, causing unplanned bail closures. Also, while taking apart reel, didn\'t realize I lost the anti-reverse cam spring.

Terence from Havelock, North Carolina

4 of 4 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
RD8147, 105B2
1. Took rotor, anti-reverse, and lower reel body off per YouTube description.
2. With photo of where the ant-reverse cam spring went, I \"figured out\" how it was configured and, with some nimble pressing with a small flat-head screwdriver, got it in place.
3. BE CAREFUL: if you don\'t keep tension on the anti-reverse selec tor, the cam spring WILL shoot out and become lost in shag carpet --(found it!)
4. Once the back of the reel was put together, took a Phillips head and removed the white plastic bail trip to install the friction ring with the rounded side out.
5. Note: friction ring looked too small for the Shimano Stradic 4000 FE but was right size.
6. Reel works great and bail doesn\'t trip suddenly, sending my lures to a watery grave.
Did you find this story helpful?
Thank you for voting!

Shimano Ultegra Scott 10000 overhaul

Rob from Toms River, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
Saltwater did a number on my reel over the last fall surf fishing run. I did a complete tear down of every part and replaced anything that was necessary

The hardest spring to get in place is the anti reverse spring, IGÇÖm not sure if some special tool would have helped but eventually I was able to get it in place with a pai r of needle nose and keep the cam switch locked in place with tape so it wouldnGÇÖt move while I adjusted the spring in place.

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18247096
Manufacturer Part Number: 105B2
Brand Model Number Description
Shimano 1000FE Spinning Reels - Sahara Spinning Reel
Shimano 2000FA Spinning Reels - Sahara Spinning Reel
Shimano 2500MGFA Spinning Reels - Stradic Spinning Reel
Shimano 4000RB Spinning Reels - Sidestab Spinning Reel
Shimano AX-2500FB Spinning Reels - Ax Spinning Reel
Shimano AX4000F Spinning Reels - Ax Spinning Reel
Shimano AX4000FA Spinning Reels - Ax Spinning Reel
Shimano AX4000RA Spinning Reels - Ax Spinning Reel
Shimano AX6000FA Spinning Reels - Ax Spinning Reel
Shimano CX2500RB Spinning Reels - Cx Spinning Reel
Shimano CX4000RA Spinning Reels - Cx Spinning Reel
Shimano FX2500FB Spinning Reels - Spinning Reel Fx
Shimano IX4000R Spinning Reels - Spinning Ix
Shimano NEX2500FD Spinning Reels - Nexave Spinning Reel
Shimano SA-1000FE Spinning Reels - Sustain Spinning Reel
Shimano SA-2500FD Spinning Reels - Sustain Spinning Reel
Shimano SA-4000FD Spinning Reels - Sustain Spinning Reel
Shimano SA-5000FD Spinning Reels - Sustain Spinning Reel
Shimano SA4000FE Spinning Reels - Spinning Reel Sustain
Shimano SA5000FE Spinning Reels - Sustain Spinning Reel
Shimano SAR-1000F Spinning Reels - Saros Spinning Reel
Shimano SAR-2500F Spinning Reels - Saros Spinning Reel
Shimano SAR-3000F Spinning Reels - Saros Spinning Reel
Shimano SE-2500FD Spinning Reels - Sedona Spinning Reel
Shimano SE-500FD Spinning Reels - Sedona Spinning Reel
Shimano SE1500FB Spinning Reels - Sprinning Reel Sedona
Shimano SE1500RB Spinning Reels - Sprinning Reel Sedona
Shimano SE2500FB Spinning Reels - Sprinning Reel Sedona
Shimano SE2500RB Spinning Reels - Sprinning Reel Sedona
Shimano SE4000FB Spinning Reels - Sprinning Reel Sedona