Part Location Diagram of 121-0487 Toro Fuel Line Kit
See part H-2 in the diagram
( Grid squares measure 1x1 inch )

Fuel Line Kit 121-0487

Manufactured by:
Toro
ERP Number:
ERP9884431
Part Number:
121-0487
Original Equipment Manufacturer ?
$54.37
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Toro
This part works with the following products:
  • Snow Blower

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced carb and fuel line. ..plugged jets and old fuel line

Jim from Franklin, Wisconsin

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
121-0487
Remove blower housing 4 bolts, remove primer cover, pinch gas line, remove carb 2 nuts...heat shield and gasket will come off too. Undo hose clips and remove gas line and primer hose from carb. Remove gas tank by undoing 3 nuts..two on carb side one on far side. Undo pinching of gas line. Drain gas in a coffee can. Unscrew gas line from t ank..undo hose clamps.
Reassemble with new fuel line kit and new carb. Don\'t waste time with carb cleaning kits. New carb kit was around 30 dollars. Entire job was less than an hour.
Toro Power Clear 180.
Note if you live in area with reformulated gas...a lot of areas in Midwest...change these parts after a few years. The gas is real hard on the gas delivery system.

Did you find this story helpful?
Thank you for voting!

Would not start

Rob from SEWARD, Nebraska

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
121-0487, 119-1977
1) Removed plastic cowling to gain access to carburetor
2) Removed fuel tank
3) Removed and replaced all fuel filters and fuel lines
4) Removed carburetor and replaced with new carburetor and gaskets
5) Highly recommend to take pictures of old carburetor with linkages connected before replacing with new for refe rence
6) Put in new fuel-it started on the second pull
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9884431
Manufacturer Part Number: 121-0487
Brand Model Number Description
Toro 38272 Snow Blower - 418 ZR Power Clear Snowblower
Toro 38273 Snow Blower - Toro Snowblower Model 38273/SERIAL: 311003001-311999999 (38273/SERIAL:311003001311999999, 38273/SERIAL: 311003001 311999999) Parts
Toro 38282 Snow Blower - 418 ZE Power Clear Snowblower
Toro 38283 Snow Blower - Toro Snowblower Model 38283/SERIAL: 312000001-312999999 (38283/SERIAL:312000001312999999, 38283/SERIAL: 312000001 312999999) Parts