1. Removed the 2 roll pins from the control ride near the right handle with a hammer and punch. Roll pins are not reusable so I re-installed cotter pins.
2. Removed the boot for the control rod tension spring and dog on the left side under the control panel.
3. Tapped the control rod through from left to right to clear for in
... Read morestallation of the new traction lever.
4. Installed the new traction cable into the traction lever and dropped it in place.
5. Reinstalled the control rod tension spring dog and bolt. Be sure the dog is above the traction lever when installing.
6. Slid the control rod back through the left handle and traction control lever.
7 Aligned the roll pin holes with the right side handle and installed cotter pins. Cut them short for clearance.
8. Installed the traction control cable to the Lowe lever and adjusted out slack.
9 Installed the traction control lever tension spring to from the lever to the control panel ( black spring
10. Tested and adjusted with blower running.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9256787
Manufacturer Part Number: 106-4410
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2008)_WW_9.gif "Part Location Diagram of 106-4410 Toro Lever-Traction")
(2008)_WW_9.gif "Part Location Diagram of 106-4410 Toro Lever-Traction")
