It is an identical replacement for a missing or a damaged extension spring that was installed on a new equipment. Check the diagrams for your specific model for the exact location and application of this hardware. Keep in mind this high-quality product is made of durable metal and is sold as an individual item. This authentic manufacturer-sourced extension spring is specially designed for Toro lawn and garden equipment.
1. Remove Drive belt cover
2. Remove belt
3. Replace belt
4. Place spring on tension wheel
5 . Use pliers to extend spring to notch below.
6. Replace outer cover
1. Pull drive belt cover.
2. Discard broken or worn belt.
3. Remove weak tension spring and install new one.
4. Install new belt over pulleys.
5. Fasten drive belt cover back to side of snowblower.
Did you find this story helpful?
Thank you for voting!
Replaced the belt and the tension spring on the snowblower.
1. Removed the protective cover (4 screws).
2. Removed the old spring.
3. Slid the old worn belt off the pulleys.
4. Installed the new belt. Slipped it over the large pulley first, then the smaller one.
5. Installed the tension spring.
6. Replaced the cover and installed the screws.
Done!
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9115143
Manufacturer Part Number: 75-9020
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/parts/lawn-and-garden/snow-blower/springs-and-shock-absorbers/"},{"position":2,"name":"75-9020","title":"75-9020","url":""}]
(1999)_WW_8.gif "Part Location Diagram of 75-9020 Toro Extension Spring")
(1999)_WW_8.gif "Part Location Diagram of 75-9020 Toro Extension Spring")
