This is a Genuine OEM replacement Paddle Bolt used on Toro Snowthrowers. It is made out of Metal and it is Sold Individually. It helps to secure the Paddle to the Rotor using a Lock Nut. Requires a Torx Screwdriver.
Troubleshooting
This part works with the following brands:
Toro
Lawn Boy
This part works with the following products:
Snow Blower
★
Customer Part Reviews
?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Snow thrower tune up
Replaced the paddles and skid on a snow thrower. Correct parts. Decent delivery time, good prices.
BRIAN - November 22, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected.
Fit perfectly.
Guest - February 6, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed as much gas as I can from tank
2. Tilted snow blower back on to handle to get to bolts. Easier if on a shop table!!!
3. Shot bolts to be removed with WD40 - let it sit awhile.
4. Using a 5/8\" (I think) socket I took off old scrapper
5. Used a hammer to tap off the old scrapper.
6. The housing of s
... Read morenow blower was slightly bent from 23years of use, so I used a 3lb hammer to carefully straighten the housing.
7. Align hole in new scrapper with mounting holes on housing and tapped into place with hammer
8. Starting from one end I put bolts into place and slightly tightened until all 3 bolts were in place
9. Tightened all bolts once in place.
10. The exploded view showing the parts on your web page helps tremendously in figuring on how to approach the job.
Read less
Did you find this story helpful?
Thank you for voting!
I replaced the blades, the old nuts did not hold. Lost 2 bolts.
Pretty straight forward. Just took out the bolts and impeller, then put\'em back in. I did need a 3rd hand to get 2 of the bolts back in on the \'passenger side\'.
Did you find this story helpful?
Thank you for voting!
Rubber rotor blades were shot and so was front scraper so I replaced them both.
One rotor at time, however after pulling first rotor did the scraper bar.
Did you find this story helpful?
Thank you for voting!
Rubber paddles and scrapper bar was worn out, after taking apart I found the half rotors on the shaft was worn as well some of the bolts for the rubber blades so I replaced the all since only 8 was ne
Removed side cover, removed belt, removed the bolt holding pulley on shaft then removed nuts and bolts for bearing, then removed three bolts on the opposite side. The inner assembly pulls out, unscrew bolts on rubber paddles and install new parts and reassemble in the reverse order.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16282787
Manufacturer Part Number: 136-7182
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
