Part Location Diagram of 7035948SM Murray (S) SCRAPER BLADE 19
See part A-45 in the diagram
( Grid squares measure 1x1 inch )

(S) SCRAPER BLADE 19 7035948SM

Manufactured by:
Murray
ERP Number:
ERP18606038
Part Number:
7035948SM
Original Equipment Manufacturer ?
  Works with your model  LE3170R!
Special Order

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   LE3170R!

Product Description

?

This replacement scraper blade is supplied directly from the original equipment manufacturer for use with Simplicity and Snapper snow blowers. These scrapers are designed to clear the ground from the leftover snow. Because this part is constantly grinding against the concrete and other surfaces it will wear out over time requiring replacement. Generally, you will be able to tell that the scraper is worn because it leaves patches of snow behind the blower. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. Keep in mind this high-quality 19" scraper blade is sold individually.

Troubleshooting

This part works with the following brands:
  • Snapper
  • Simplicity
This part works with the following products:
  • Snow Blower
Part# 7035948SM replaces these:
7035948SM,

Customer Part Reviews

?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced broken ignition switch and scraper blade.

Vincent from Long Valley, New Jersey

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
7035948SM, 7017817YP
1. Removed back cover of snowblower to gain access to the ignition switch.
2. Disconnected the two wires leading to the old switch.
3. Removed the nut holding the ignition switch in place.
4. Installed new switch using the nut to lock it into place and connected both wires.
5. Removed the nuts and bolts holding th e broken scraper blade in place.
6. Placed the new scraper blade in position and bolted into place.
Did you find this story helpful?
Thank you for voting!

Impeller broke at a weld when it snagged a rock close to the street. Twisted under and snagged scraper bar ruining it also.

Rex from Lincoln, Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
7052940SM, 7035948SM, 7024618YP
Replaced impeller or auger and scraper bar on bottom. Installed new belt while I had it apart. Literally eight to ten screws and a half dozen bolts and done in under an hour.
Did you find this story helpful?
Thank you for voting!

Scraper worn and broken

Paul from Ames, Iowa

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
7091148SM, 7035948SM, 703251
Some of the nuts were worn so had to use vicegrips with the hex socket. If replace scraper blade, plan to also replace nuts and screws.
Did you find this story helpful?
Thank you for voting!

Scraper blade was worn out.

Arthur from Hazelwood, Missouri

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
7035948SM
Soaked the nuts and screws with WD-40 for a while
Removed the screws and screws from the scraper
Installed the new scraper with new nuts and bolts purchased at a hardware store
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18606038
Manufacturer Part Number: 7035948SM
Brand Model Number Description
Simplicity 1694382 Snow Blower - Snowblower
Simplicity 1694383 Snow Blower - Snowblower
Simplicity 1694583 Snow Blower - Snowblower
Simplicity 1694584 Snow Blower - Snowblower
Simplicity 319E Snow Blower - Simplicity Snowblower Model 319E Parts
Simplicity 319M Snow Blower - Simplicity Snowblower Model 319M Parts
Snapper 7080370 Snow Blower - Snapper Snowblower Model 7080370 Parts
Snapper 7080371 Snow Blower - Snapper Snowblower Model 7080371 Parts
Snapper 7080426 Snow Blower - 19" Lady Garden Single Stage Snow Thrower
Snapper 7080487 Snow Blower - Snapper Snowblower Model 7080487 Parts
Snapper 7080488 Snow Blower - Snapper Snowblower Model 7080488 Parts
Snapper 7083464 Snow Blower - Snapper Snowblower Model 7083464 Parts
Snapper 7084362 Snow Blower - Snapper Snowblower Model 7084362 Parts
Snapper 7084363 Snow Blower - Snapper Snowblower Model 7084363 Parts
Snapper 7084559 Snow Blower - Snapper Snowblower Model 7084559 Parts
Snapper 7084560 Snow Blower - Snapper Snowblower Model 7084560 Parts
Snapper 7084561 Snow Blower - Snapper Snowblower Model 7084561 Parts
Snapper 7084675 Snow Blower - Snapper Snowblower Model 7084675 Parts
Snapper 7085660 Snow Blower - Snapper Snowblower Model 7085660 Parts
Snapper 7085661 Snow Blower - Snapper Snowblower Model 7085661 Parts
Snapper 7085662 Snow Blower - Snapper Snowblower Model 7085662 Parts
Snapper 80370 Snow Blower - Gas Snowblower
Snapper 80487 Snow Blower - Gas Snowblower
Snapper 80488 Snow Blower - Gas Snowblower
Snapper 84362 Snow Blower - Gas Snowblower
Snapper 84363 Snow Blower - Gas Snowblower
Snapper 84364 Snow Blower - Gas Snowblower
Snapper 84559 Snow Blower - Gas Snowblower
Snapper 84675 Snow Blower - Gas Snowblower
Snapper 85660 Snow Blower - Gas Snowblower