Part Location Diagram of 1687806 Murray Kit, Scaper Bar & Flight
See part B--- in the diagram
( Grid squares measure 1x1 inch )

Kit, Scaper Bar & Flight 1687806

Manufactured by:
Murray
ERP Number:
ERP10069504
Part Number:
1687806
Original Equipment Manufacturer ?
On Order

Easy 

30 - 60 mins 

(11 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic OEM sourced parts kit that is intended to be used with snowthrowers from Murray, Snapper, and Simplicity. The scraper bar attaches to the rear of the bottom of the auger housing to protect the edge of the housing and to collect snow. The flights attach to the auger axle and are used to gather snow into the impeller.

Troubleshooting

This part fixes the following symptoms:
  • Will not blow snow
This part works with the following brands:
  • Murray
  • Snapper
  • Simplicity
  • Briggs and Stratton
  • Ariens
  • Craftsman
This part works with the following products:
  • Snow Blower
Part# 1687806 replaces these:
1687489YP, 1687628YP, 1687806, 1752238,

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(9 Reviews)
Click to filter by ratings:
  • 5 stars
    8
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Ask our experts a question about this part and we'll get back to you as soon as possible!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I need only the Scraper Blades for my Single Stage Snowthrouwer 22 Inch. Do you know where I can get just those.
Ray For model number 1695885 - February 26, 2022

Hello Ray, thank you for writing. We do not find the blades sold separately but with Scraper Bar & Flight kit 1687806. The scraper bar attaches to the rear of the bottom of the auger housing to protect the edge of the housing and to collect snow. The flights attach to the auger axle and are used to gather snow into the impeller. We hope this helps.

eReplacementParts Team
February 26, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(11 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Worn parts

Richard from new providence, New Jersey

9 of 9 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
1687806
Place the snowblower on a work bench
Remove the screws from the old paddles, remove the paddles
Remove the nuts and bolts from the scraper, remove the old spacer
Install the new scraper
Did you find this story helpful?
Thank you for voting!

scraper was worn off and changed the paddles.

Edward from Oregon, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
1687806
1. removed old scraper bar. 4 phillips head screws.
2. removed old paddles. 8 security head screws sprayed with wd-40.
3. replaced old paddles with new paddles and used the new security screws supplied with new paddles.
4. replaced the old scraper bar with new one and used the new phillips head screws provided with the kit.
5. changed oil on unit and started it up.
All good.
Did you find this story helpful?
Thank you for voting!

None so far. We haven\'t had a chance to use it

Brian from Fort Calhoun, Nebraska

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
1687806
R and I. No special instruction needed
Did you find this story helpful?
Thank you for voting!

plastic bar and worn

James from Bay Village, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set, Wrench (Adjustable)
Parts Used:
1687806
remove old and install new. note the position of the metal cross bar. it will go on reversed and go together until you try and push the unit.
Did you find this story helpful?
Thank you for voting!

Replace scraper bar and rubber augers

Joseph from FRANKLIN, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
1687806
Remover worn out auger paddles, replace scraper bar. Luckily the screws were not rusted ,so the removal process was easy.
Did you find this story helpful?
Thank you for voting!

flight and cutting edge worn

Steve from Sioux falls, South Dakota

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
1687806
removed old fasteners and parts, installed new parts and included fasteners
Did you find this story helpful?
Thank you for voting!

Needed new blades and scraper

Paul from WOLCOTTVILLE, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
Parts Used:
1687806
Removed old.
Replaced with new.
Would recommend removing old blades first, then scraper.
Put new scraper on first then blades.
Did you find this story helpful?
Thank you for voting!

Worn out scraper and wheel

william from Fraser, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
1687806
Removed the old scraper and wheel. Reinstalled the new and tested. No adjustment needed for re installation. System is ready for the next storm
Did you find this story helpful?
Thank you for voting!

Normal wear and tear on parts need replaced every so often

Matt from Ft Wayne, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set
Parts Used:
1687806
Remove four screws for flappers, remove old flappers and replace screws. Done remove four screws for scraper, remove reinforcement plate. Reassemble. Done. The scraper bar did come as bear metal so it was worth giving it a coat of paint so it would not rust
Did you find this story helpful?
Thank you for voting!

Rubber paddles had broken

Greg from Midvale, Utah

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1687806
1. Removed 6 screws holding old paddle in place
2. Removed old paddle
3. Installed new paddle and secured with existing screws
4. Repeated for other paddle
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP10069504
Manufacturer Part Number: 1687806
Brand Model Number Description
Murray 1022 Snow Blower - Bands 9.5 Gross Tp 22-Inch Single Stage Snowthrower
Murray 1022E Snow Blower - Bands 9.5 Gross Tp 22-Inch Single Stage Snowthrower
Murray 1022EE Snow Blower - 9.5tp 22-Inch Single Stage Snowthrower
Murray 1022ER Snow Blower - Bands 9.5 Gross Tp 22-Inch Single Stage Snowthrower
Snapper 1022EX Snow Blower - 22 Inch Snow Thrower, 9.5hp
Murray 1222EE Snow Blower - Bands 11.5 Gross Tp 22-Inch Single Stage Snowthrower
Murray 1222EED Snow Blower - Bands 11.5 Gross Tp 22-Inch Single Stage Snowthrower
Snapper 1687817 Lawn Tractor Accessories - Snowshredder Auger Kit
Snapper 1687817YP Lawn Tractor Accessories - Snowshredder Auger Kit
Simplicity 1695875 Snow Blower - 8Tp 22In Single Stage Snowblower
Simplicity 1695876 Snow Blower - 8Tp 22In Single Stage Snowblower
Simplicity 1695877 Snow Blower - 9Tp 22In Single Stage Snowblower
Simplicity 1695879 Snow Blower - 8Tp 22In Single Stage Snowblower
Murray 1695885 Snow Blower - 8TP 22" Single Stage Snowthrower
Murray 1696161-00 Snow Blower - 22" Single Stage Snowblower
Murray 1696162-00 Snow Blower - 22" Light-Duty Single Stage Snowblower
Simplicity 1696205-00 Snow Blower - Si822E, 8Tp 22In Single Stage Snowblower
Murray 1696211-01 Snow Blower - Murray 8 Gross Tp 22-Inch Single Stage Snowthrower, Ce
Murray 1696225-01 Snow Blower - Canadiana 8.0 Gross Tp 22-Inch Single Stage Snow Thrower (Ce)
Simplicity 1696231-00 Snow Blower - SS7522E, 7.5Tp 22In Single Stage Snowblower
Simplicity 1696232-00 Snow Blower - 0 - Ss822Ex, 8Tp 22In Single St
Simplicity 1696233-00 Snow Blower - Ss922Ex, 9Tp 22In Single St
Murray 1696294-00 Snow Blower - Canadiana 9tp 22-Inch Single Stage Snowthrower
Murray 1696306-00 Snow Blower - Sno-Tek, 22-Inch Single Stage Snowthrower
Murray 1696315-00 Snow Blower - Craftsman 8tp 22-Inch Single Stage Snowthrower
Murray 1696315-01 Snow Blower - Craftsman 8tp 22-Inch Single Stage Snowthrower
Murray 1696433-00 Snow Blower - Craftsman 9.0 Gross Tp 22-Inch Single Stage Snowthrower
Murray 1696553-00 Snow Blower - Craftsman 7.5 Gross Tp 22-Inch Single Stage Snowthrower
Murray 1696554-00 Snow Blower - Craftsman 9.0 Gross Tp 22-Inch Single Stage Snowthrower
Murray 1696554-01 Snow Blower - Craftsman 9.0 Gross Tp 22-Inch Single Stage Snowthrower