It is a genuine item that is supplied directly from the original manufacturer for use with snowthrowers. The friction disc is an important component of the drive mechanism that helps to propel the equipment forward. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. If the friction disc is worn or damaged, the snowblower will move slowly, erratically or not move at all. Please make sure to check the diagrams of your model for the correct location and application of this part. Keep in mind this high-quality assembly is made of durable metal and is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Same as original part
My 25 year old snow blower lives again. After the local lawn and garden shop told me it couldn’t be repaired I watched a couple YouTube videos and decided I could do it myself. The replacement part matched perfectly. I was up and running in about 1.5 hours.
Guest - August 1, 2019
Verified Purchase
★★★★★
★★★★★
Quick and easy repair!
The Friction wheel was in pristine condition when it arrived. A very quick and easy disassemble and reassemble while apart I was able to tweak other adjustments, Now my snowblower runs a lot better than I first got it
Guest - January 4, 2021
Verified Purchase
★★★★★
★★★★★
worked great
very easy to install
Guest - February 1, 2022
Verified Purchase
★★★★★
★★★★★
Work as should
Part took 11 days longer than what I paid for but worked as it should.
Guest - January 13, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Took the back plate off, drained the gas from the tank, tipped the snow blower on its front, removed the wheels pulled the axle removed the old part replaced it with the new part and reassembled.
Removed worn parts and reinstalled new parts. It took about 1 hour including readjustment of cable actuating friction wheel. The compartment where the friction Disc assembly is contained is very tight requiring the plate be inserted at an angle before inserting pivot pins in their proper holes. Reinstalling the friction wheel was simple w
... Read moreith the bearings removed, after the friction wheel was in place the reinstalling the bearings was easy.
Read less
Did you find this story helpful?
Thank you for voting!
Friction wheel was 30 years old and needed replacing
Removed skid plate by removing four 3/8 hex head screws
Remove 1/2GÇ¥ bolt in the ends of the drive shaft
Using snap ring pliers remove or slide to the center of the driveshaft the retainer ring for the chain drive
Slide driveshaft towards the chain drive pulley and out of the barring .
You should have enough ro
... Read moreom to remove old friction wheel off the opposite end of the driveshaft. If you need more room to remove the actuator remove the cotter pin and separate amateur.
At this point your Removal is done.
Install new friction wheel make sure to insert the actuator and slide the driveshaft into the barring and in stall the bolt. Now slide the chain drive pulley back over to where it belongs. Slide snap ring over to retain the chain pulley in its place. Put the other bolt in the end of the driveshaft. Make sure the actuator is working properly before reconnecting the amateur with the cotter pin. Make sure snap ring is in the retaining grove. If all is operating correctly replace skid plate. Tighten all bolts.... now wait for the next snowstorm
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9313214
Manufacturer Part Number: 984-0042C
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 984-0042C MTD Wheel Assy Frictio")
_WW_1.gif "Part Location Diagram of 984-0042C MTD Wheel Assy Frictio")
