It is a genuine OEM item that is made for Craftsman lawn and garden equipment. This is a special component which helps to provide a tight fit between connected parts. It is an identical replacement for a damaged or a missing hardware that was installed on a new equipment. Make sure to check the appropriate diagrams for your model to ensure the proper repair procedure. It is made of durable plastic material and is sold as an individual item.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Very Easy
Fit as expected, and removed most wandering in the steering control on my Troy-built riding mower.
Howard - June 10, 2019
Verified Purchase
★★★★★
★★★★★
perfect fit
arrived quickly and was the correct part
Guest - July 3, 2019
Verified Purchase
★★★★★
★★★★★
Looks good but have not used it yet!
Part arrived with other parts in very fast time. I will order from you folks again!
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair parts
The part came fast and in great condition. Our lawnmower is working great. Thank you
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
Was exactly what I ordered
Guest - August 7, 2019
Verified Purchase
★★★★★
★★★★★
Easy replace, huge improvement!
Perfect fit. As advertised.
James - September 23, 2019
Verified Purchase
★★★★★
★★★★★
Easy site to find my part
I ordered this bushing to tighten the steering back up on my 2006 Troybilt mower. Diagrams made it easy to find the part I needed and delivery was quick. Will definitely use again when I need parts for this mower.
Guest - May 21, 2021
Verified Purchase
★★★★★
★★★★★
Easy Repair
Part fit correctly and arrived fast.
Terrence - May 9, 2024
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the gas tank for working space,then removed the dash and the shaft retainer to remove the steering wheel and shaft.
Replaced the gear and bushings and added the support plate that my early model did not have. This removed the play in the gear and allowed the steering shaft the fit tightly removing the looseness in the steeri
... Read moreng ,when it was reassembled, it was better than new.
Started out removing steering shaft then the gear assembly and retainer plate then put the new parts back same order that was removed ending with greasing all parts fit perfect steers like new again
Took off the mower deck
Jacked up the front of the mower
Unscrewed the steering wheel under the mower
Took off the Hex flanged bearing and the steering pinion
Put back on the nut that holds the steer wheel in place
Put the lawn more down from the jack
Put the mower deck back on
Make sure you take
... Read morepictures of the work as you do it in case you forget how to put it back together. I sharpened my blades while I had the deck off.
Using a 3/8 inch drive ratchet and a half inch socket remove retaining nuts pop out worn bushings and replace with new Bushings replaced nuts,working great.
Removed nut from bottom of steering rod, removed steering pinion gear. removed bracket from gas tank and moved it back out of the way, without disconnecting the lines, placed new bushing, steel this time instead of original plastic, in the slot for it; then I repositioned steering rod thru hole in bushing, installed steering pinion gear,
... Read morewasher and nut, and tightened until snug, and then set the gas tank back into place and secured it. It worked and the lawn tractor once again can be steered.
Removed deck. Removed lower the bolt on shaft. Removed gas tank and bracket. Removed steering wheel Removed steer shaft and bushing. Reinstalled all parts in reverse.
Did you find this story helpful?
Thank you for voting!
Gears just wore out.
stephen from Elkhart, Indiana
1 personfound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_4.gif "Part Location Diagram of 941-0475 MTD Bushing-.380 Id")
_WW_4.gif "Part Location Diagram of 941-0475 MTD Bushing-.380 Id")
