Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
16419056-1-M-Husky-735-04032-Spiral Crescent
Part Location Diagram of 735-04032 Husky Spiral Crescent
See part A-43 in the diagram
( Grid squares measure 1x1 inch )
16419056-1-S-Husky-735-04032-Spiral Crescent Part Location Diagram of 735-04032 Husky Spiral Crescent

Spiral Crescent 735-04032

Manufactured by:
Husky
ERP Number:
ERP16419056
Part Number:
735-04032
Original Equipment Manufacturer ?
  Works with your model  31AM2P5B033!
$26.65
★★★★★
★★★★★
4 Reviews
On Order

Easy 

15 - 30 mins 

(14 rated repairs) ?
  Works with your model   31AM2P5B033!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Repair Instructions Model Cross Reference

Product Description

?

This is a Genuine OEM Approved replacement part designed for use with Snow Throwers. This part is made out of Rubber and it is Sold Individually. This part mounts with 2 Screws (Sold Separately) at each end. You would need a Wrench to replace this part • Remove the ignition key • Disconnect spark plug • Tilt Snowblower back so it rests on it's handles for support • Remove all 4 bolts on the auger paddle and then remove the paddle • Install the new auger paddle into the bracket on the auger shaft • Make sure that the auger paddles are secure

Frequently Purchased Together

?
Rubber Paddle
$12.50
On Order

Troubleshooting

This part works with the following brands:
  • MTD
  • Yard Machines
  • Troy-Bilt
  • Husky
  • Yard Man
  • Bolens
  • Ryobi
This part works with the following products:
  • Snow Blower
  • Lawn Mower
Part# 735-04032 replaces these:
735-04032,
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
The review says it all.
The product was received promptly,for perfectly,and is good quality.I am very satisfied. Thanks.
Guest - October 14, 2019
Verified Purchase
★★★★★
★★★★★
Great delivery
Parts were delivered quickly and fit correctly. Yet to try in the snow but I'm sure I will have an opportunity and sure the snowblower will work much better
Guest - November 13, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, thank you.
Paddles received...now found out the cause of old ones coming apart. Weld on the rod holding paddles broken causing damage to paddles. Will now have to order whole assembly. Thanks
Guest - February 3, 2022
Verified Purchase
★★★★★
★★★★★
Perfect Match
After receiving the wrong part from a different supplier, I was a little shy of trying again with a new supplier but Ereplacement was right on the money. It was an easy order. My only problem was with the shipping company. They kept changing the delivery date. Final was a day late. About 36 hours after they said it was on the truck and out for delivery from about 5 miles away.
Guest - August 27, 2022
Verified Purchase

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(14 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replace paddles

Alan from Taylor, Michigan

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
735-04032, 735-04033
Removed the old paddles
Installed the new paddles
Did you find this story helpful?
Thank you for voting!

Paddles just wore out.

Ernest from MARINE CITY, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
735-04032, 735-04033
Removed the old paddles and installed the new ones. Machine works as good as when it was new.
Did you find this story helpful?
Thank you for voting!

Needed new paddles

alan from taylor, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
735-04032
Remove the bolts from the old paddles
Install the new paddles with the bolts
Did you find this story helpful?
Thank you for voting!

Paddles worn out

David from Clinton, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
735-04032
1. Removed old paddles and installed new ones. 4 bolts each. Could not be easier.
Did you find this story helpful?
Thank you for voting!

Replace worn parts

Donald from Detroit, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
735-04032, 735-04033, 731-1033
Remove the old auger pales and center paddles
Install the new paddles
Remove the the old shave plate
And install the new on about 1/8 inch to 1/4 inch above the ground
Did you find this story helpful?
Thank you for voting!

Paddles were worn out

Arthur from Lincoln, Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
735-04032
Removed old paddles and replaced these with new paddles
Did you find this story helpful?
Thank you for voting!

Rubbers were worn out.

Richard from Milwaukee, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
735-04032
Removed all the rubbers. Replaced all rubbers ,piece of cake.
Did you find this story helpful?
Thank you for voting!

4 Rubber spiral crescents and 2 rubber paddles were worn out.

Randy from Manchester , Connecticut

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
735-04032, 735-04033
Very easy to replace the rubber parts on my Troy-Bilt snowthrower. All were exactly the same as the worn out ones so I am extremely satisfied.
Did you find this story helpful?
Thank you for voting!

rubber paddles worn out

Victor from St. Charles, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
735-04032
They are held on by simple hex-headed screws. Took less than half an hour to replace all 4 and adjust the bottom plastic scraper.
Did you find this story helpful?
Thank you for voting!

The rubber crescents were wearing down so not getting a clean snow throw.

Dean from Eagle River, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
735-04032
Removed four worn crescents from auger and replaced with new. Small snowblower easy replacement. Rubber crescents, pretty simple fix.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP16419056
Manufacturer Part Number: 735-04032
Brand Model Number Description
Husky 31A-140-131 Snow Blower - Snowblower
Yard Machines 31A-240-700 Snow Blower - Snowblower
Husky 31A-240-731 Snow Blower - Snowblower
Yard Machines 31A-242-762 Snow Blower - Snowblower
Yard Machines 31A-250-700 Snow Blower - Snowblower
MTD 31A-260-762 Snow Blower - Snowblower
MTD 31A-261-000 Snow Blower - Pro Snow Thrower
MTD 31A-261-002 Snow Blower - Pro Snow Thrower
MTD 31A-261-009 Snow Blower - Pro Snow Thrower
MTD 31A-261-016 Snow Blower - Pro Snow Thrower
MTD 31A-261-019 Snow Blower - Pro Snow Thrower
MTD 31A-261-022 Snow Blower - Pro Snow Thrower
MTD 31A-261-026 Snow Blower - Pro Snow Thrower
MTD 31A-261-029 Snow Blower - Pro Snow Thrower
MTD 31A-261-033 Snow Blower - Pro Snow Thrower
MTD 31A-261-054 Snow Blower - Pro Snow Thrower
MTD 31A-261-057 Snow Blower - Pro Snow Thrower
MTD 31A-261-077 Snow Blower - Pro Snow Thrower
MTD 31A-261-098 Snow Blower - Pro Snow Thrower
MTD 31A-261-105 Snow Blower - Pro Snow Thrower
MTD 31A-261-118 Snow Blower - Pro Snow Thrower
MTD 31A-261-121 Snow Blower - Pro Snow Thrower
MTD 31A-261-129 Snow Blower - Pro Snow Thrower
MTD 31A-261-131 Snow Blower - Pro Snow Thrower
MTD 31A-261-134 Snow Blower - Pro Snow Thrower
MTD 31A-261-138 Snow Blower - Pro Snow Thrower
MTD 31A-261-145 Snow Blower - Pro Snow Thrower
MTD 31A-261-151 Snow Blower - Pro Snow Thrower
MTD 31A-261-196 Snow Blower - Pro Snow Thrower
MTD 31A-261-205 Snow Blower - Pro Snow Thrower
Spiral Crescent
$ 26.65
On Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖