This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or damaged cable originally installed on new units and plays a vital role in engaging the auger for proper snowblower operation. Made with high-quality rubber insulation, this durable component is sold individually. Please note that the housing, trigger, and hardware are not included and must be purchased separately. For proper installation, refer to your model’s diagram, and be prepared to use tools such as pliers and a wrench set.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
snow be gone
was very happy for the quick service.. my neighbor replaced the two cables and we are good to go.. the parts/cables came in safe packaging and new condition..
Guest - November 28, 2019
Verified Purchase
★★★★★
★★★★★
Part worked well!
Part arrived within 4 days. The part fit perfectly and repair went smooth. I would recommend my friends to buy from you. Your customer service person was very cordial and my order went smoothly.
Guest - January 30, 2020
Verified Purchase
★★★★★
★★★★★
easy to find the part I needed
The Pictures made finding my part very convenient ,delivery was fast .Thank you
Guest - February 5, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
My snowblower works like new
Guest - February 11, 2020
Verified Purchase
★★★★★
★★★★★
Snow blower auger cable
Part arrived on time and fit perfectly. Completely satisfied!
Guest - March 16, 2020
Verified Purchase
★★★★★
★★★★★
correct parts , fast service
no problem in getting the right parts and service was quick
Guest - November 27, 2020
Verified Purchase
★★★★★
★★★★★
recieved as ordered
Perfect fit thank you
Guest - January 4, 2021
Verified Purchase
★★★★★
★★★★★
Exact replacement part
The cable is a life saver, I thought I was going to need to buy a new snow blower because Craftsman decided that they weren't going to carry parts for my machine any longer. Granted it is 9 years old, but really? No parts? Then I remembered using this website for parts for an older weedeater.
This cable fits my craftsman 30" walk behind snow blower, not just fits but it was an exact match! as in Identical! The hardest part of the entire install was to get the rear belly pan off of the machine. Cable was installed without any tools, just clip it on one end and route it to the handle bars and hook it on the lever...DONE. Simple, easy, great! Put the rear pan back on and go back to blowing snow. Thanks ereplacements, Your website is saved in my favorites now!!!
Guest - February 8, 2021
Verified Purchase
★★★★★
★★★★★
Snow Blower Cable
Would like to highly recommend fast service and very helpful
Thanks
Guest - April 6, 2021
Verified Purchase
★★★★★
★★★★★
Arrived quickly right part for the repair very happy.
The part fit perfectly arrived on time very happy.
Guest - December 6, 2021
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1.Removed cover over the belts.
2. Removed spring from auger clutch.
3. Both pulleys had to be removed to snake the cable through.
4. After cable was through, then I attached the spring to the clutch.
5. Attach the cable to the handle.
6. Then finally reattach the pulleys. It is a lot easier to attach t
... Read morehe pulleys last.
7. Then put the cover back on. Done. Boom.
Remove the pulley housing located behind the snow shot, 2- 3/8 bolts, one on each side. snake the cable through the two tension pulley\'s one on the back and the other one up towards the front of the belts, that one you will have to remove and adjust the pulley so you can snake the cable through. It was so easy anyone can do it. And the c
... Read moreable fit perfect.
1. Took the plastic housing off the auger assembly.
2. Removed the bolts from the the two pulleys.
3. Removed the old cable.
4. Fed the new cable into the two pulleys, and tightened down.
5. Put the spring end of the cable into the auger assembly, and the other end into the handle.
6. Put the two pulleys bac
... Read morek and tightened.
7. Done.
Remove broken cable and bad belt. You need to remove inspection belt cover, tilt snow blower up and remove skid plate. Remove broken cable and bad belt. Put new belt on then replace broken cable. Put on new cable that engages the clutch and adjust. Put on inspection cover. All Finished went very well and saved me a lot of money doing th
... Read moree repairs my self. Saved a lot of time by not having to send my snow blower in for repair. I am very happy and will always do repairs my self. Thanks
Read less
Did you find this story helpful?
Thank you for voting!
Broken cable at point of bend around horizontal pully.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 946-04230B MTD Snow Blower Auger Cable")
_WW_2.gif "Part Location Diagram of 946-04230B MTD Snow Blower Auger Cable")
