This is an original replacement part sourced directly from the manufacturer. The ignition coil assembly is commonly found in snowblowers from MTD and Yard Machines. This part is made of metal and plastic, and is used to carry an electric current to the engine for ignition. You may require a screwdriver or wrench when replacing this item. The ignition coil assembly is sold as an individual replacement part.
The ignition coil needed to be replaced. The following removal gave access to the coil for replacement.
1. Remove the top muffler cover, carburetor covering, and engine cover with engine rope starter which exposes the ignition coil.
Since the removal of the carburetor cover releases the pressure held onto the carburetor, thu
... Read mores possibly cause a carburetor gasket to leak I also slid the carburetor off and replaced the three gaskets in place between the engine head, carburetor, linkage bracket and air inlet. It is also required to remove the snow exit shoot to be able to access the two bolts that hold on the top engine cover.
2. Check gap of existing coil to flywheel magnet before detaching the coil. The coil detached with just one wire disconnected and two mounting bolts removed.
3. Cleaned the magnets on the flywheel.
4. Install the new coil and gapped it to approximately 20 thousands with a feeler gauge.
5. Install remaining removed items in reverse order. Test run.
Read less
Did you find this story helpful?
Thank you for voting!
Getting old ND needed some TLC
Steven from Brodhead, Wisconsin
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
I cleaned the Engine, changed the Oil, replaced the Spark Plug replaced the coil assembly and replaced the Carb that was in bad shape. It went pretty smooth. You just have to lay out your parts and take your time.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11813440
Manufacturer Part Number: 951-10646A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
