1. To replace the drive belts, you must remove the entire front end of the machine.
2. Many bolts to remove, including 10 holding the chute assembly to the main body.
3. The belts were easy to replace, but you have to pull the impeller shaft from the chute.
4. While apart I noticed that the impeller bearing had seized. S
... Read moreince it is not a press fit, it was easy to replace.
5. The side auger bearings were marginal, so I replaced them also.
6. Getting everything back together was a pain. All these chute bolts must be lined up. I had to use a tapered tool to get the holes lined up.
&. Total time for me was about 8 hours total.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12144732
Manufacturer Part Number: 96150-60040-10
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
