Carburetor Assembly (bb70a C) 16100-Z0J-H03

Not sure which part I needed, very helpful on your end

Ordered the replacement carb from eReplacement, staff helped correctly identify exact match for new carb. Original carb was leaking fuel from throat when running. First tried float bowl drop and cleaning of needle float valve, but did not solve the problem. Cost of replacement carb was excellent, so chose that as solution. Hardest part is removing snowblower shrouds. Need 10mm socket for shroud bolts. Once back shroud is removed, advise you photograph governor and throttle spring connections. Turn gas line to “off”. Remove hoses. 10mm socket to remove carb, recommend a friend to help identify which gaskets go where and their orientation as you slide carb off engine, they will suddenly drop out of assembly without warning. Remove gas and breather lines, twist carb to release linkage from throttle body. Replace linkage and carb in reverse order being careful to note orientation of gasket breather holes with carburetor passages. Reattach hoses and springs. EReplacementParts carb was OEM and a perfect fit. Hardest job is clearing shrouds from snowblower. Being patient and allowing time for photographs and figuring out shroud removal job estimate is a little over an hour. Recommend 1/4 drive socket wrench with small extension, 10mm and 12mm sockets, needle nose pliers. Use engineered fuel (Trufuel), or ethanol-free (clear gas) gas to reduce impacts of ethanol on small engine performance and carburetor life. EReplacementParts.com gets 5 Stars!