Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Up and running
The Shoulder Screw was a perfect fit. Snowblower was a "Display" Model that had a substitute part that failed. Found & ordered this OEM Part to solve problem. Could have ordered Expedited shipping, but Standard worked just fine. Tracking was sketchy but okay. WILL order again for other power equipment.
Robert - February 7, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. removed old gear box & chute. Replaced chute (easy) just slips on in place of old one.
2. attached new gear box (easy) one bolt with wing nut & one bolt with cotter pin.
3. Lined up chute & gear box to fit (medium) had to undo gear box cotter pin/bolt & loosen other bolt & quite a bit of wriggling and a few mallet taps.
... Read morer />4. Put shoulder screw through gear box and fasten flange lock nut (very hard). it is dam near impossible as it has to line up perfectly. there is a washer inside the chute cavity & a very hard to get to slide in for the flange lock nut. Much tinkering with loosening everything to get the bolt to go down far enough & line up for the lock nut to get hold of a thread. For the lock nut there is a slip in cavity on the chute that is extremely hard to access and the line up with the bolt is no easy task. Some WD helped but the line up was more than frustrating. This was a least 1 1/2 hour before success. Be very careful not to over tighten as this was the reason I needed a new chute in the first place. I do not have kind thoughts for the engineering of this setup.
5. Attached gear box cable to trigger handle.(hard) disassemble trigger handle & place collar of cable onto holder & then end of cable on to sliding piece while replacing trigger back into place & then put handle back together. Would have worked better with two people as all these pieces like to pop out once you start on another portion. Spent another 1 1/2 hour on this working solo. Get help with this it\'ll be much easier.
I am not overly mechanically inclined, perhaps someone more so would have an easier job of it.
The old Screw had broken. I ordered the replacement. While waiting, I removed the nut from the broken screw and waited. Once here, I replaced the nut, inserted the Shoulder Screw, and tightened with a small socket and ratchet wrench.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9109169
Manufacturer Part Number: 738-04367
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
