8792204-1-M-Ariens-03884451-Scraper Blade- 24-inch Compact

( Grid squares measure 1x1 inch )

8792204-1-S-Ariens-03884451-Scraper Blade- 24-inch Compact

Scraper Blade- 24-inch Compact 03884451

Manufactured by:: Ariens
ERP Number:: ERP8792204
Part Number:: 03884451

Works with your model 920403!

$34.26

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(2 rated repairs) ?

Works with your model 920403!

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

This scraper blade is intended to be used with snow throwers from Ariens. The scraper is a direct replacement of the original that would have been included when the snow thrower was new. This part attaches to the bottom rear of the auger housing assembly. This part is used to collect snow and ice so that the auger can propel the snow through the chute. A hex wrench or ratchet is needed to install this part.

Troubleshooting

This part works with the following brands:

Ariens

This part works with the following products:

Snow Blower

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(2 rated repairs) ?

< Prev
1
Next >

Sort by:

Make sure you replace this scraper blade before it wears down so much that the bolts holding it on are now wearing against the ground surface. It will be difficult to gt these nuts off if.

James from West Roxbury, Massachusetts

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set
Parts Used:: 03884451

Use a socket, wrench, or adjustable wrench to remove nuts from 5 bolts securing the scraper blade to the housing.
If the bolts and or nuts are worn or rusted you should replace those with new ones from a local hardware store.
This scraper blade does NOT come with new nuts and bolts.

Did you find this story helpful?

Scraper blade worn

Robert from ROCK SPRINGS, Wyoming

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Wrench set
Parts Used:: 03884451

1. Removed the old scraper blade
2. Installed the new scraper blade, with new bolts and nuts
3. Adjusted skids so the scraper blade is approximately 1/8\" off the surface.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP8792204
Manufacturer Part Number: 03884451

Brand	Model Number	Description
Ariens	920304	Snow Blower - Sno-Tek 22 Snowblower
Ariens	920305	Snow Blower - Sno-Tek 24 Snowblower
Ariens	920306	Snow Blower - Sno-Tek 26 Snowblower
Ariens	920309	Snow Blower - Sno-Tek 24 Snowblower
Ariens	920313	Snow Blower - Sno-Tek 24 Ce
Ariens	920314	Snow Blower - Sno-Tek 28 Ce
Ariens	920315	Snow Blower - Sno-Tek 22
Ariens	920320	Snow Blower - Sno-Tek 20 Recoil Ce
Ariens	920324	Snow Blower - Sno-Tek 22 Ce
Ariens	920400	Snow Blower - Sno-Tek 24
Ariens	920401	Snow Blower - Sno-Tek 26 Snowblower
Ariens	920402	Snow Blower - Sno-Tek 24 Snowblower
Ariens	920403	Snow Blower - Sno-Tek 28 Snowblower
Ariens	920404	Snow Blower - Sno-Tek 24 Snowblower
Ariens	920405	Snow Blower - Sno-Tek 24 Inch Snow Blower Lct Stormforce 208cc Engine