Mixer Gears

Used for Kitchenaid Mixers.

Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.

Use with stand mixers.

This pinion gear is a genuine OEM replacement part for your KitchenAid mixer. The pinion gear is located in the transmission housing and can become worn down over time. To complete this repair, you will need a pair of snap ring pliers to access the housing.

This part is a genuine KitchenAid part. The Internal Gear is used in all six-quart mixers and many five-quart mixers. This Gear is found in the lower portion of the Lower Gear Casing. This Gear drives the Agitator Shaft that turns the mixing attachments such as the Flat Beater. This gear should be replaced when there is significant wear or if any of the teeth have been damaged.

Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.