This is a manufacturer sourced replacement part designed for use with Ryobi scroll saws. This is an important part of the dust blowing mechanism. Over time this part can become brittle and crack allowing for air leaks. To complete this repair you would need a screwdriver. This flexible plastic bellows is sold individually.
Troubleshooting
This part works with the following brands:
Ryobi
This part works with the following products:
Scroll Saw
Part# 089051003028 replaces these:
S1601019,
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(17 Reviews)
Click to filter by ratings:
5 stars
15
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
works good.
arrived on time. The size was bit small but I made it work., Thank You.
Guest - September 7, 2021
Verified Purchase
★★★★★
★★★★★
Great part
Arrived exactly as described
Guest - September 20, 2021
Verified Purchase
★★★★★
★★★★★
Worked as expected, right part !
My scroll saw is working well again.
Guest - October 24, 2021
Verified Purchase
★★★★★
★★★★★
So simple
Took a chance and ordered the bellows not knowing for sure if it would fit my 20-year-old scroll saw. Well, it was an exact fit and it works fine. I'm very happy with the quick delivery, great price and easy ordering process.
Guest - February 28, 2022
Verified Purchase
★★★★★
★★★★★
Worked perfectly on Craftsman 137.216100 scroll saw
Not an exact replacement part but it works perfectly.
Gene - September 6, 2022
Verified Purchase
★★★★★
★★★★★
Quick delivery
Everything as promised.
Guest - April 14, 2023
Verified Purchase
★★★★★
★★★★★
Wade
It's just what I needed. Thank you
Guest - June 9, 2023
Verified Purchase
★★★★★
★★★★★
Easy Fix
I ordered several pieces to have on hand. The parts were delivered promptly and were a perfect fit.
Guest - June 13, 2023
Verified Purchase
★★★★★
★★★★★
GREAT PART
I HAVE A CRAFTSMAN SCROLL SAW AND WORK PERFECT THANK YOU
Guest - April 18, 2020
Verified Purchase
★★★★★
★★★★★
Great service
Got an odd part I wasn’t sure I’d find and it came pretty quick too. Thanks!
Guest - May 19, 2020
Verified Purchase
< Prev
1
2
Next >
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
Less than 15 mins
(13 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The bellows had a hole preventing the dust blower from functioning.
1. Remove the 2 screws on the bellows cover mounted on the top side of the scroll saw with a #2 Phillips screwdriver.
2. Remove the damaged bellows.
3. Insert new bellows.
4. Secure the 2 cover screws and the job is complete.
Had to figure out how to unloosen the top holder for the bellows . Once I figured that out it was relatively simple to put back together. Just had to remember to not over tighten the holder. Go on line to look at parts that need replacing . Read first then again before doing any dismantling .
Did you find this story helpful?
Thank you for voting!
Original bellows was cracked and leaking from fatigue.
New bellows was inserted into the frame. The old air cap with tubing connection was placed on top and rotated to lock into position. Reconnected air tube. That\'s it!
The bellows I received from you worked on my old Hitachi CW-40 scrollsaw. Original parts for my saw are no longe available. I am gratefull that you had bellows that I could use to keep my saw going. Thank You
The saw is a Skil saw, the replacement part by luck is a bellows from another manufacturer. Skil saw has listed their bellows as \"Discontinued\". I found the replacement through scrolling through different manufacturers. As luck has it the replacement was a perfect fit. Dropped in the single part/replacement and reattached the tube that
... Read moredelivers air flow to the blade dusr removal tube.
1) Removed plastic bellows top by twisting it free and exposing broken bellows.
2) Removed old rubber bellows
3) Replaced bellows top and connected hose.
Did you find this story helpful?
Thank you for voting!
bellows to blow sawdust from blade cutting path had a hole. would not move air.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
