It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT and Delta scroll saws. These are the parts utilized to secure the fuse which is sold separately. One durable plastic cap and a holder are included. Make sure to check the owner's manual for your model to ensure the proper repair procedure. A screwdriver will be needed to take the housing apart to perform this repair.
1. Remove old socket by pulling it out with pliers. Now realizing I need to get into saw.
2. Remove all screws from main housing and arm cover.
3. Remove saw table.
4. Open casing to reveal circuits.
5 Insert new socket housing from outside. Press on retaining ring from inside. Secure with hot
melt
... Read moreglue.
6 Reattach wires to socket.
7 Reassemble saw in reverse order as disassembly.
Attached black and red wires however the part sent listed as the correct fuse holder for DW788 does not fit this scroll saw, one lead on holder is on the end and one is on the side and they both are so loose they have to be taped on it then does not fit into the hole in the saw, original holder has both wire attachments on the end and fit
... Read more tightly not having to be taped to keep them on,
Removed stars removed from back cover.
Removed back brace for tilting fable.
Loosened star screws front of bottom cover.
Pulled back cover far enough to split apart.
Replace fuse holder from back to front.
Replace wires on to fuse holder.
Put back together in reverse order ensure wires are tucked
... Read more into cover where required.
Plugged in the wires to the fuse holder ,had to close up the clips as they were to wide ,installed the fuse & turned on the saw & it worked fine.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/power-tool/scroll-saw/caps-and-lids/"},{"position":2,"name":"5140163-11","title":"5140163-11","url":""}]
_WW_1.gif "Part Location Diagram of 5140163-11 DeWALT Holder And Cap")
_WW_1.gif "Part Location Diagram of 5140163-11 DeWALT Holder And Cap")
