Part Location Diagram of 23-66-3110 Milwaukee Micro-switch/pcba/term. Block
See part A-61 in the diagram
( Grid squares measure 1x1 inch )

Micro-switch/pcba/term. Block 23-66-3110

Manufactured by:
Milwaukee
ERP Number:
ERP10123838
Part Number:
23-66-3110
Original Equipment Manufacturer ?
  Works with your model  2682-059!
$56.44
Special Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   2682-059!

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Saw
  • Chop Saw
  • Circular Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The repair was on a circular saw used for metal cutting. As a result of a project that required cutting over 20\' of 1/4\" thick mild steel plate the circuit board that regulates and modulates voltage

chuck from Jerome, Idaho

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
23-66-3110
1. Removed the screws that hold the two halves of the outer case together.
2. Split the case and accessed the circuit board that failed.
3. Verified the failure. It was evident by the black soot around of the two transistors along with the hole that was left in the transistor case where the failure occurred.
4. Verified the Model and serial number of the saw, and got on eReplacemntParts web site which allowed me to access the manufacturers parts list and exploded picture for this saw.
5. The information supplied allowed me to order the replacement part required for the repair.
6. Once the part arrived,(which by the way was quite quickly) the repair was a simple remove the damaged piece and replace it with the new one.
7. With the repair made the two case halves were rejoined and the screws replaced.
8. A freshly charged battery was installed in the saw and it performed like new.
A simple fix that cost considerably less than a new saw with a minimal of time required to due the repair. A win win in my book.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10123838
Manufacturer Part Number: 23-66-3110
Brand Model Number Description
Milwaukee 2682-059 Saw - Milwaukee 2682-059-(D70a) Parts
Milwaukee 2682-20 Circular Saw - Cordless 5-3/8" Metal Cutting Saw
Milwaukee 2682-22 Chop Saw - Cordless 5-3/8" Metal Cutting Saw