Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10118952-1-M-Milwaukee-06-82-5314-Pan Head Torx Screw
Part Location Diagram of 06-82-5314 Milwaukee Pan Head Torx Screw
See part 7 in the diagram
10118952-1-S-Milwaukee-06-82-5314-Pan Head Torx Screw 360 view
( Grid squares measure 1x1 inch )
10118952-1-S-Milwaukee-06-82-5314-Pan Head Torx Screw 10118952-2-S-Milwaukee-06-82-5314-Pan Head Torx Screw 10118952-3-S-Milwaukee-06-82-5314-Pan Head Torx Screw 10118952-1-S-Milwaukee-06-82-5314-Pan Head Torx Screw 360 view
Part Location Diagram of 06-82-5314 Milwaukee Pan Head Torx Screw

Pan Head Torx Screw 06-82-5314

Manufactured by:
Milwaukee
ERP Number:
ERP10118952
Part Number:
06-82-5314
Original Equipment Manufacturer ?
  Works with your model  2730-059!
$5.95
★★★★★
★★★★★
2 Reviews
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(12 rated repairs) ?
  Works with your model   2730-059!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a genuine Milwaukee Taptite-« Pan Head Torx Screw for use with a variety of equipment. Use only appropriate tools of correct size to tighten and loosen the screw while following the basic common safety precautions. Size 10-24 X 1/2.

Frequently Purchased Together

?
Shoe Pin
★★★★★
★★★★★
(7)
$5.95
In Stock
Minimum Quantity of 2 required
Outer Flange Blade
★★★★★
★★★★★
(7)
$7.62
In Stock
Minimum Quantity of 2 required
Washer
★★★★★
★★★★★
(3)
$5.95
In Stock
Minimum Quantity of 2 required
M6 X 28mm Carriage Bolt
$5.95
In Stock
Minimum Quantity of 2 required
Blade Screw
★★★★★
★★★★★
(3)
$5.95
In Stock
Minimum Quantity of 2 required
Clutch Washer
★★★★★
★★★★★
(1)
$5.95
In Stock
Minimum Quantity of 2 required
Clutch Plate
$5.95
In Stock
Minimum Quantity of 2 required
Guard Spring
★★★★★
★★★★★
(1)
$5.95
In Stock
Minimum Quantity of 2 required
Disc Spring
$7.62
In Stock
Minimum Quantity of 2 required
Shoe Assy
$49.30
In Stock
Insulator 6519-31
$10.50
In Stock
Lower Guard
$35.61
In Stock
Depth Lever
$5.95
In Stock
Lower Guard
$35.05
In Stock
Lower Guard
$33.60
Special Order
Pulley Cover (1 Of 2)
$5.95
Special Order
Lower Guard Lever
$5.95
In Stock
Lower Guard Lever
$5.95
In Stock
Depth Lever
$5.95
In Stock
Insulator
$10.50
In Stock
Depth Shaft
$7.62
In Stock
Lever Depth Black
$5.95
In Stock
Depth Shaft
$5.95
In Stock
Lower Guard
$43.45
In Stock
Washer
$5.95
In Stock
Minimum Quantity of 2 required
Lower Guard Lever
$5.95
In Stock
Washer Flat 1/4
$5.95
In Stock
Minimum Quantity of 2 required
Lower Guard
$27.38
In Stock
Lever, Guard
$5.95
In Stock
Depth Shaft
$6.70
In Stock
Lever Lower Guard
$11.43
In Stock
Depth Shaft
$5.95
Special Order

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Saw
  • Circular Saw
  • Router
  • Reciprocating Saw
  • Band Saw
  • Miter Saw
  • Orbital or Palm Sander
  • Cordless Drill
  • Chop Saw
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to fix
The screws for my sawsall came out and I couldn't find them. Looked everywhere but no luck. Found them here and they were very easy to replace.
GLENN - October 3, 2020
Verified Purchase
★★★★★
★★★★★
Correct part arrived, no problem
The part was correct and arrived soon enough given shipping problems these days.
Guest - January 26, 2022
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(12 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Shoe assembly fell in hole

Kenneth from WALLED LAKE, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
45-16-0030, 06-82-5314
I took 2 minutes so easy and I am not kidding!!!
Did you find this story helpful?
Thank you for voting!

Blade guard broken

JOHN from Bowling Green, Kentucky

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
40-50-0045, 28-41-1032, 06-82-5314
Removed outer blade cover - removed snap ring retainer for blade guard - installed new guard & re-installed cover
Did you find this story helpful?
Thank you for voting!

The saw was dropped, broke the lower guard and lever.

Walter from Griswold, Connecticut

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
44-10-1008, 28-41-0101, 06-82-5314
Take off the blade. Remove the snap ring to remove the guard. Make sure to unhook the guard spring. Clean and grease if need be, then replace parts.
Did you find this story helpful?
Thank you for voting!

Band saw wheel tires dryed out and broken.

Dennis from Yuma, Arizona

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
45-69-0010, 06-82-5314
Removed wheels from bandsaw. Replaced tires with new ones. Installed wheels on saw.
Did you find this story helpful?
Thank you for voting!

Missing parts

Peter from Wawona, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
49-96-0600, 44-10-0007, 06-82-5314
Just replaced missing parts on outside of circular saw.
Did you find this story helpful?
Thank you for voting!

Handle bar was not working

DON from ERIE, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
31-52-0017, 45-88-8461, 14-73-0256, 06-82-5314
Removed the stripped lever and replaced with new
Did you find this story helpful?
Thank you for voting!

Insulator boot was loose and slipping toward end of saw while in use. One torx screw missing T-25

Joe from Plant City, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
45-12-2054, 06-82-5314
Removed old boot, slid new one into place. Removed remaining screw and used two new with Loctite so the vibration wouldn\'t loosen them again. Saw is back in use and working just fine. Cutting inner skin 6 times, of a 140\' x 18\' wall.
Did you find this story helpful?
Thank you for voting!

broken handle on a circuilar saw

Lowell from Rimrock, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
44-10-0420, 06-82-5314
simple replacement by removing the the attachment screw and replacing the handle . retighten attachment screw . all finished in less than 5 minutes.
Did you find this story helpful?
Thank you for voting!

Safty gaurd broke

Peter from SOUTH WEYMOUTH, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
06-82-5314
Removed the blade.
Remove Saturday screws and dust extract screws.
Remove spring and guard.
Install new lower guard and reverse above steps.
Install new handle and replace screw.
Did you find this story helpful?
Thank you for voting!

Replaced cheap plastic guard for magnesium guard

Michael from Ottawa, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
44-10-0420, 28-41-0958, 06-82-5314
Removed top guard, removed snap ring on bottom guard, spring on bottom guard, bottom guard and replaced. Put lever on and screwed lever tight. All done!!
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP10118952
Manufacturer Part Number: 06-82-5314
Brand Model Number Description
Milwaukee 0730-20 Circular Saw - Cordless Circular Saw
Milwaukee 0730-22 Circular Saw - Cordless Circular Saw
Milwaukee 0730-50 Saw - Milwaukee 0730-50-(A57a) Parts
Milwaukee 0740-20 Circular Saw - Cordless Metal Cutting Saw
Milwaukee 0740-22 Circular Saw - Cordless Metal Cutting Saw
Milwaukee 0740-50 Saw - Milwaukee 0740-50-(A94c) Parts
Milwaukee 0830-50 Circular Saw - Cordless Circular Saw
Milwaukee 2530-20 Circular Saw - M12 Fuel Circ Saw - Bare
Milwaukee 2530-20XC Saw - Milwaukee 2530-20xc-(G32a) Parts
Milwaukee 2630-20 Circular Saw - 18 Volt Circular Saw
Milwaukee 2630-22 Circular Saw - 18 Volt Circular Saw
Milwaukee 2631-20 Circular Saw - M18 Bl 7-1/4 Inch Circ Bare
Milwaukee 2682-059 Saw - Milwaukee 2682-059-(D70a) Parts
Milwaukee 2682-20 Circular Saw - Cordless 5-3/8" Metal Cutting Saw
Milwaukee 2682-22 Chop Saw - Cordless 5-3/8" Metal Cutting Saw
Milwaukee 2707-20 Cordless Drill - M18 Fuel 1/2" Hole-Hawg
Milwaukee 2707-22 Cordless Drill - M18 Fuel 1/2" Hole-Hawg
Milwaukee 2707-22HD Pipe Tools - 2707-22hd (Serial G02a) M18 Fuel 1/2-Inch Hole-Hawg Parts
Milwaukee 2708-20 Cordless Drill - 7/16" Hex Hole-Hawg
Milwaukee 2708-22 Miscellaneous - Milwaukee 2708-22-(G03a) Parts
Milwaukee 2709-20 Cordless Drill - Milwaukee 2709-20-(G60a) Parts
Milwaukee 2709-22 Cordless Drill - Milwaukee 2709-22-(G60a) Parts
Milwaukee 2711-20 Cordless Drill - Milwaukee 2711-20-(G61a) Parts
Milwaukee 2711-22 Cordless Drill - Milwaukee 2711-22-(G61a) Parts
Milwaukee 2729-20 Band Saw - M18 Fuel Deep Cut Bandsaw
Milwaukee 2729-21 Band Saw - M18 Fuel Deep Cut Bandsaw
Milwaukee 2729-22 Band Saw - M18 Fuel Deep Cut Bandsaw
Milwaukee 2729S-20 Band Saw - M18 Fuel Deep Cut Bandsaw W/Two Hand
Milwaukee 2730-059 Saw - Milwaukee 2730-059-(F70a) Parts
Milwaukee 2730-20 Circular Saw - Cordless M18 Fuel Circular Saw
Pan Head Torx Screw
$ 5.95
In Stock
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖