Part Location Diagram of 224275-9 Makita Outer Flange
See part A-23 in the diagram
( Grid squares measure 1x1 inch )

Outer Flange 224275-9

Manufactured by:
Makita
ERP Number:
ERP10142378
Part Number:
224275-9
Original Equipment Manufacturer ?
  Works with your model  LXSL01!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(3 rated repairs) ?
  Works with your model   LXSL01!

Product Description

?

This part has been OEM sourced to ensure quality. The metal flange is intended to be used with circular saws from Makita. This item aligns with the flat sides of the spindle and is used to secure the blade. The flange disperses the pressure but on the blade by the blade bolt across a wider surface area to fasten the blade to the spindle. This item may require a hex socket wrench to install and is sold as an individual item.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Saw
  • Circular Saw
  • Miter Saw
Part# 224275-9 replaces these:
224152-5,

Customer Part Reviews

?
4.4
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    1
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Flanges and bolt were missing

Robert from So Dartmouth, Massachusetts

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
251644-1, 224275-9, 224151-7
I first sprayed down the saw with cleaned to loosen up the parts. Then used penetrating oil to grease it up. Put on the inner flange,blade,outer flange and bolt. Started her up and wahala! Good to go thank you for having the parts so readily available!
Did you find this story helpful?
Thank you for voting!

Repaired power cord, brushes and replaced flange nuts

Aaron from Boise, Idaho

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Removed half of the switch handle, Remove two screws from cord holder, removed the the cord wires from the switch, cut the cord leads to the correct length, had to locate two terminals to put on the end of the cord leads. Attached cord leads to switch.don\'t for get to put the old cord relief back onto the new cord. reattached the cord ho lder with the two screws. Then replace the handle half. For the brush set, I removed the brush caps, then removed the old brush set and installed the new set and the brush caps. I also replaced the inner and outer flanges, and the blade bolt.
Did you find this story helpful?
Thank you for voting!

Blade Backing Washer Broke

Michael from Huddleston, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
251644-1, 224275-9, 224151-7
Removed Blade installed new backing Washer and reinstalled blade
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10142378
Manufacturer Part Number: 224275-9
Brand Model Number Description
Makita 5007F Circular Saw - 7-1/4" Circular Saw with Brake
Makita 5007FA Circular Saw - 7-1/4" Circular Saw with Brake
Makita 5007FAK Circular Saw - Circular Saw
Makita 5007FK Circular Saw - Circular Saw
Makita 5007LNK Saw - Saw
Makita 5007NB Circular Saw - Circular Saw
Makita 5007NBA Circular Saw - Circular Saw
Makita 5007NBA-K Saw - Saw
Makita 5007NBK Circular Saw - Type 1 7-1/4" 15A Heavy-Gauge Aluminium Base Circular Saw
Makita 5007NH Circular Saw - Circular Saw
Makita 5007NHK Saw - Saw
Makita 5007NL Circular Saw - Circular Saw
Makita 5007NLK Saw - Saw
Makita 5007S Circular Saw - Circular Saw
Makita 5008B Saw - Saw
Makita 5008FA Circular Saw - Circular Saw
Makita 5008NB Circular Saw - Circular Saw
Makita 5008NBA Saw - Saw
Makita 5026D Circular Saw - Cordless Circular Saw
Makita 5026DWB Circular Saw - Cordless Circular Saw
Makita 5036D Circular Saw - Cordless Circular Saw
Makita 5036DWB Circular Saw - Dustless Circular Saw
Makita 5037NB Circular Saw - Circular Saw
Makita 5037NBA Circular Saw - Circular Saw
Makita 5046D Circular Saw - Cordless Circular Saw
Makita 5046DWB Circular Saw - Cordless Circular Saw
Makita 5057B Circular Saw - Circular Saw
Makita 5057KB Circular Saw - 7-1/4&#34 Circular Saw
Makita 5077B Circular Saw - Hypoid Saw
Makita 5177B Circular Saw - Hypoid Saw