Part Location Diagram of 039066005050 Ryobi Spring Clamp
See part A-6 in the diagram
( Grid squares measure 1x1 inch )

Spring Clamp 039066005050

Manufactured by:
Ryobi
ERP Number:
ERP10075987
Part Number:
039066005050
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(25 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Ryobi replacement part, it is sold individually. The purpose of the 039066005050 Spring Clamp is to clamp the sandpaper to the platen of the sander. Once the sandpaper is placed on the sander the spring clamp is pulled up and attached to the side of the platen to secure the sandpaper. If you want to order the spring clamps already attached to the Platen you can order part number 039066005054 Platen Assembly.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Ryobi
  • Craftsman
This part works with the following products:
  • Sander Polisher
Part# 039066005050 replaces these:
039066005050,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(15 Reviews)
Click to filter by ratings:
  • 5 stars
    13
  • 4 stars
    1
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(25 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Sand paper clamps were broken.

GarnettI from Moreno Valley, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
Using a screwdriver, easily replaced broken clamps with the new ones.
Did you find this story helpful?
Thank you for voting!

Spring clamp just broke due to normal wear and tear

Kevin from BEAUMONT, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
Unplugged sander, set on table got out my screwdriver took out the 2 screws 1 per side took out old spring clamps. Put new ones in grabbed my screwdriver and put the 2 screws back in and viola. All done!!!
Did you find this story helpful?
Thank you for voting!

Broken spring clamp and wore out pad.

steve from LAKEMONT, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005051, 039066005050
1. Removed old spring, replaced new.
2. Removed old pad, replaced new.
Did you find this story helpful?
Thank you for voting!

Pad worn spring clamp broken

micheal from lemoore, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
039066005051, 039066005050
Removed the screws, pulled the parts off and replaced with the new replacement screws.
Did you find this story helpful?
Thank you for voting!

Sandpaper hold down spring brokr

Vince from CHAPEL HILL, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
Part fit perfectly
Did you find this story helpful?
Thank you for voting!

Hold down clip was broken

Gary from Craigsville, West Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
Replaced both hold down clips
Did you find this story helpful?
Thank you for voting!

Spring clamp on palm sander broke

John from San Antonio, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
The replacement clamp is must thicker and sturdier than the original. Highly recommend them.
Did you find this story helpful?
Thank you for voting!

Spring clamp broke

Agustin from Miami, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
Removed the broken spring clamp using a philips screw driver. Then reinstalled the new one.
Did you find this story helpful?
Thank you for voting!

The Spring Clamp snapped an made it difficult to hold sandpaper.

Elston from FAIRFIELD, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
039066005050
Started my removing the Old Spring Clamp with a Screw Driver & Pliers. Checked the Sander over to See if need for repair on it, but everything came out fine. Attached everything back together & the Spring Clamp work like a Charm sanding away like new!! I would have Never would had finished my projects with out my Ryobi Sander. Without the Help from eReplacementParts.com, who have great Service Personnel & Great Shipping Service at that. I would recommend them to anyone.
Did you find this story helpful?
Thank you for voting!

The spring clamp was broken.

Angela from SAINT PETERSBURG, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
039066005050
Removed the screw and replaced the broken clamp; replaced the screw.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP10075987
Manufacturer Part Number: 039066005050
Brand Model Number Description
Craftsman 315111770 Sander Polisher - Sheet Sander
Ryobi PSL1QS01 Sander Polisher - Power Stroke 1/4 Sheet Sander
Ryobi S652D Sander Polisher - 1/4 Sheet Double Insulated Sander
Ryobi S652DG Sander Polisher - 1/4 Sheet Double Insulated Sander
Ryobi S652DK Sander Polisher - 1/4 Sheet Double Insulated Sander