Part Location Diagram of A04176 DeWALT SPINDLE
See part 39 in the diagram
( Grid squares measure 1x1 inch )

SPINDLE A04176

Manufactured by:
DeWALT
ERP Number:
ERP18990614
Part Number:
A04176
Original Equipment Manufacturer ?
  Works with your model  259485!
$9.12
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   259485!

Product Description

?

It is a genuine manufacturer-supplied part that is made for use with Porter Cable drywall sanders. The spindle is a special component which helps to drive the vacuum adapter. If the hardware is missing or is damaged, this will provide an identical replacement for the original part that was installed on a new unit. One durable metal spindle is included. Check the owner's manual and the appropriate diagram for your model to ensure the proper repair procedure.

Troubleshooting

This part works with the following brands:
  • Porter Cable
  • DeWALT
This part works with the following products:
  • Sander Polisher
Part# A04176 replaces these:
A04176, PA04176,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Head bearing wore out on Porter Cable 7800 power sander

Steve from Somerset, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
A04176, 330003-64
Disassembled the backup pad, and drive pad beneath to expose bearing. Removed bearing snap ring to remove worn out bearing and spindle. Cleaned, removed snap ring and re-used for reassembly of new parts, and reinstalled. Snap ring pliers needed to be the tiniest one made which I didn\'t have, so I used my grinder to grind off the end of t he old spindle to remove. I would recommend that the 2 parts be sold as one assembly. If not make sure you order a new snap ring for spindle attachment to bearing. The large retainer snap ring for bearing can easily be re-used.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18990614
Manufacturer Part Number: A04176
Brand Model Number Description
Porter Cable 259385 Sander Polisher - Drywall-Sander
Porter Cable 259485 Sander Polisher - 110V Drywall-Sander
Porter Cable 7800 Sander Polisher - Drywall Sander 3.5 Amp
Porter Cable 7801 Sander Polisher - Drywall Sander