My sander was mounted to a table so to access the removable panel on the bottom of the unit, it first had to be unbolted from the table. Next step was to remove the bottom panel, 4 phillips screws. I opted to replace both capacitors since I could see that one was leaking and suspected that the other one was probably strained. One was secu
... Read morered by a nut on the end of it, the other held by a band clamp, several minutes to swap them out, take note of where the wires are fastened, however, they are AC, so it shouldn\'t matter. I also purchased a relay, but didnGÇÖt need it and will save for future. I did a quick test with the bottom panel off and it ran great, so I installed the bottom panel, re bolted the sander to the table and I am back in business. One thing to note, the parts received were exact replacements, not cheap substitutes, buy with confidence.
Determined that relay designed to drop out starting capacitor, after belt sander motor was started, didnGÇÖt isolate the start capacitor from the run circuit. Replacing relay and capacitor solved the problem.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18982078
Manufacturer Part Number: 5140087-18
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
