Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
Install
videos!
18979991-1-M-DeWALT-151281-09-PAD
Part Location Diagram of 151281-09 DeWALT PAD
See part 24 in the diagram
Replacing your DeWALT Sander Polisher PAD
( Grid squares measure 1x1 inch )
18979991-1-S-DeWALT-151281-09-PAD Part Location Diagram of 151281-09 DeWALT PAD Replacing your DeWALT Sander Polisher PAD

PAD 151281-09

Manufactured by:
DeWALT
ERP Number:
ERP18979991
Part Number:
151281-09
Original Equipment Manufacturer ?
  Works with your model  DW421!
$39.63
★★★★★
★★★★★
4 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(15 rated repairs) ?
  Works with your model   DW421!

Jump to:

Description Troubleshooting Repair Videos Reviews Repair Instructions Model Cross Reference

Product Description

?

Genuine OEM replacement part, this part is sold individually. The 151281-09 Pad is used to hold 5 inch PSA (Pressure Sensitive Adhesive) sandpaper with 8 vacuum holes. Applying too much pressure on the sander may cause premature wear on the pad. When a pad needs to be replaced, simply remove the three screws that hold the pad to the sander, then replace it with a new pad.

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Porter Cable
  • Black and Decker
This part works with the following products:
  • Sander Polisher
Part# 151281-09 replaces these:
151281-09,

Videos For installing this part.

?
Replacing your PAD
★

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
Arrived quickly and in good condition. Easy to install.
Guest - August 19, 2019
Verified Purchase
★★★★★
★★★★★
Easy
Just what I was looking for. Worked great
Guest - September 4, 2020
Verified Purchase
★★★★★
★★★★★
New parts
Pad arrived very fast fit perfectly and is a great replacement
Guest - June 23, 2023
Verified Purchase
★★★★★
★★★★★
Easy swap
As above
Guest - May 28, 2023
Verified Purchase

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(15 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Backing pad wore out so I ordered a new adhesive backing pad for my Dewalt orbital sander

Gerard from Marshfield, Massachusetts

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
151281-09
Remove three screws from the old pad, replace with new pad and insert same three screws!
Did you find this story helpful?
Thank you for voting!

The orbit belt was worn also the pad

William from Kennedy, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
903373, 151281-09
Remove the 3 screws attaching the old worn pad on and remove the pad. Blow out the inside of the sander to get rid of the sawdust. Remove the old belt, then replace it just as the other was. Install the new pad with the same screws.
Did you find this story helpful?
Thank you for voting!

pad wore out

bob from Front Royal, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
151281-09
took old pad off and put the mew one on
Did you find this story helpful?
Thank you for voting!

Self stick pads removed the protective layer on the pad when I took the abrasive pads off. It eventuAlly started to take part of the sander pad.

Allen from Bethlehem, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
151281-09
1. Removed 3 screws securing the pad.
2. Removed existing pad.
3. Replaced pad.
4. Tightened 3 screws.
Did you find this story helpful?
Thank you for voting!

pad came apart

John from Newport, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
151281-09
replaced pad
Did you find this story helpful?
Thank you for voting!

hook and loop sanding pad worn out

michael from christiansburg, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
151281-09
followed simple instructions on repair parts package
Did you find this story helpful?
Thank you for voting!

Old pad had curled around perimeter

John from Auburn Hills, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
151281-09
Unscrew mounting screws and replace pad
Did you find this story helpful?
Thank you for voting!

Foam pad separated from its base.

Roger from Morley, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
151281-09
Removed the old part, fastened down the new pad.
Did you find this story helpful?
Thank you for voting!

Pad worn out.

Kerry from ARAB, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
151281-09
Power drill to remove screws. Discard old pad, attached new pad.
Did you find this story helpful?
Thank you for voting!

Adheasive pad was rotten. Brake was torn. Replaced bearing while I was in there.

Bruce from Homosassa, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
151281-09, N110363, A26817
Removed three screws holding pad.
Removed Brake.
Lifted off bearing.
Put everything back in reverse order.

Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP18979991
Manufacturer Part Number: 151281-09
Brand Model Number Description
Black and Decker 2771 Orbital or Palm Sander - 5 Random Orbit Palm Sander
Porter Cable 344 Sander Polisher - 5" PSA Random Orbit Sander
Porter Cable 394 Sander Polisher - 5&#34 Low Profile Random Orbit Sander
DeWALT D26450 Sander Polisher - Random Orbit Sander
DeWALT D26451 Sander Polisher - Random Orbit Sander
DeWALT D26453 Sander Polisher - Random Orbit Sander
DeWALT DW421 Sander Polisher - Random Orbit Sander
DeWALT DW422 Sander Polisher - EVS Random Orbit Palm Sander
DeWALT DW423 Sander Polisher - 5 inch EVS Random Orbit Sander
PAD
$ 39.63
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖