It is a genuine OEM component which is designed for Delta sanders. This is the gear that attaches to the camshaft. It helps to drive the spindle assembly. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment operates properly. One durable plastic gear is included. To ensure the proper repair procedure, refer to the appropriate diagrams of your model. To perform this repair a screwdriver and a wrench set will be necessary to take the housing apart.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Replacement of old gear
I found the eReplacement web page very thorough and suitably easy to use. When it came time to cancel a part of my order, due to delayed shipment, I found the young lady who helped me both immediately helpful and friendly. eReplacement is now entered in my computer as the go-to site for the purchase of parts necessary to keep my ageing tools in working order.
Guest - October 13, 2020
Verified Purchase
★★★★★
★★★★★
Almost perfect!
Had to drill the "through" hole for the keeper (there was only one hole, and the keeper was long enough to go through the shaft) but other than that, the issue was resolved with this replacement part!
Guest - August 22, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed broken gear.installed new gear.CAUTION. after installing new gear on gear shafts you must drill a second roll pin hole through the gear. Gear comes with only one hole.why? Who knows. I found this out from the Delta tech support guy.
1. I installed the dust chute and gasket.
2. Put gear on shaft and drill hole for roll pin.
3. Installed roll pin and check gear for proper movement.
4. Installed motor in unit and installed cams.
5. wired up motor and check for proper operation. OK.
6. Put lube on gear and installed gear cover.
7. Ran
... Read moreunit for 10 min. All work OK.
Inverted machine on workbench and placed spindle through dog hole so machine would sit flat. Removed cover of gear and worm housing. Removed base of machine by removing four screws. Removed allen screws which held linkage in place. Removed linkage and cams and spring. Drove roll pin out of gear. Drove axle out of machine far enough
... Read moreto remove gear. replaced gear. Drove axle back in place. Replaced roll pin. Replaced linkage, allen screws, spring, and base of machine. Greased gears. Machine runs like a champ.
There is a video on YouTube which details the process pretty well. He mentions late in the video to remove the base. It\'s better to do this first thing.
Read less
Did you find this story helpful?
Thank you for voting!
oscillation on oscillating spindle sander stopped working due to stripped gear teeth.
took tool apart; replaced gear; put tool together.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
