Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
18986809-1-M-DeWALT-846724-PAD
Part Location Diagram of 846724 DeWALT PAD
See part 132-A in the diagram
( Grid squares measure 1x1 inch )
18986809-1-S-DeWALT-846724-PAD Part Location Diagram of 846724 DeWALT PAD

PAD 846724

Manufactured by:
DeWALT
ERP Number:
ERP18986809
Part Number:
846724
Original Equipment Manufacturer ?
$56.82
★★★★★
★★★★★
12 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(27 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Reviews Questions & Answers Repair Instructions

Product Description

?

Genuine Porter Cable replacement part. • Pad Dimensions: 4-1/2" by 4-1/8". Includes one pad. • Sturdy Felt Backing for long life. • Conveniently easy to take on and off. • 4 screw holes to keep your pad firmly attached. Can use existing screws on your tool, or go to the schematics page for your tool to find and order new screws.

Troubleshooting

This part works with the following brands:
  • Porter Cable
This part works with the following products:
  • Sander Grinder
  • Sander Polisher
Part# 846724 replaces these:
846724,
★

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(12 Reviews)
Click to filter by ratings:
  • 5 stars
    9
  • 4 stars
    2
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
I am always able to find the needed part at this site.
Whenever I an looking for any repair part, I immediately go to EReplacementParts. I have had success finding what I would think would hard to find. I am amazed at the access to parts.
Ken - April 19, 2019
Verified Purchase
★★★★★
★★★★★
Part worked perfectly. Got my project finished.
Fitted perfectly. No problems installing it. Saved me mo eyes buy ot having to replace sander.
Guest - April 23, 2019
Verified Purchase
★★★★★
★★★★★
easy to fix
better than expected
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Felt better than foam
My original backing pad was made of foam. The new felt pad is a lot more firm. Very happy with the product.
Guest - August 5, 2019
Verified Purchase
★★★★★
★★★★★
i REPLACED THE SANDING PAd
The part was brand new and it worked great.
Guest - October 9, 2019
Verified Purchase
★★★★★
★★★★★
A perfectactory match
It took 5 minutes to install.
Guest - October 17, 2020
Verified Purchase
★★★★★
★★★★★
Quick and Efficient
Easy to use website, quick and efficient service
Guest - October 17, 2020
Verified Purchase
★★★★★
★★★★★
excellent service
Second time I've used this company. Parts are from the original manufacturer and are shipped quickly.
Guest - February 9, 2021
Verified Purchase
★★★★★
★★★★★
Part is perfect!
Good as new now! Perfect part replacement.
David - August 2, 2021
Verified Purchase
★★★★★
★★★★★
Quality Control?
The alignment of the holes in the aluminum plate and the felt was off, but I made it work. Good price slow delivery. I blame the delivery on USPS everything shipped by them lately seems to be slow.
Guest - January 29, 2021
Verified Purchase
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(27 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Old sanding pad fell apart with age. Bought sander over 20 years ago

John from Pahala, Hawaii

18 of 18 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
1. Removed the four screws holding old sanding padded plate
2. Remove old padding plate and inserted new padded plate
3. Line up screw holes then reinsert the four screws and tighten and you are done.

Note* Being able to find a part for a took that was over 20 years old was quite a surprise
to me. I contact ed a number of my friends and passed on your web site to them.
Read less
Did you find this story helpful?
Thank you for voting!

The Porter Cable sander pad is worn out

Leonard from Santa Clara, California

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
Removed the worn out sander pad felt backing. Using a regular phillips screw driver. Took me to r&r the pad less than 10. minutes
Did you find this story helpful?
Thank you for voting!

Sander was some 30 years old and the original pad had decomposed.

Odin from Mancos, Colorado

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
I removed the old pad by removing four screws, put on the new pad, and replaced the four screws. Simple.
Did you find this story helpful?
Thank you for voting!

Worn felt pad

Searle from Bainbridge Island, Washington

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
1.Removed old pad - 4 screws
2.installed new pad - replace 4 screws
Did you find this story helpful?
Thank you for voting!

Felt pad was worn and needed replacement

Thomas from Mooers Forks, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
Removed the four screws on the bottom of the felt pad. Checked the dust cover, then replaced the worn pad with the new and reinstalled four holding screws.
Did you find this story helpful?
Thank you for voting!

Felt pad had come off back up metal plate

Walter from MARSTONS MILLS, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724, 681637
1. Order came really fast and just what I requested
2. Removed the four screws holding the old pad on
3. Installed the new pad with four new screws
Did you find this story helpful?
Thank you for voting!

Pad wore out

Charlie from Chambersburg, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
Unscrewed screws from old pad...... screwed on new pad
Did you find this story helpful?
Thank you for voting!

All the felt backing had deteriorated placing sandpaper directly against metal back plate

Larry from Lewistown, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
Removed old backing plate by removing four screws and installed new felt backed plate by inserting same four screws, bingo, done!
Did you find this story helpful?
Thank you for voting!

Pad worn out

Tom from North Augusta, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
1. Remove 4 screws
2. Place new pad down
3. Put 4 screws back
Did you find this story helpful?
Thank you for voting!

Sander pad was worn out

robert from kent, Washington

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
846724
Remove four screws from the worn pad
Remove the worn pad
Place the new pad on the sander
Secure the pad to the sander with the four screws
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3
PAD
$ 56.82
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖