This is an authentic replacement part manufactured for use with Milwaukee straight grinders and die grinders. The spindle gear drives the spindle and is driven by the armature gear. This spindle gear is available as an individual replacement part, please see model diagram for associative parts.
1.)Separate halves of the gear case
2.)Take nut off the end of the spindle shaft
3.)Press out spindle and remove the spindle bearing and the spindle gear by backing the gear with a slotted plate and pressing the spindle shaft out
4.)Remove the armature and then remove the armature gear the same as the spindle gear. Gent
... Read morely heating the gear might be required.
5.)Press on new gears.
6.) Replace other damaged parts such as carbon brushes, electrical cord etc.
7.) Put new bearing on spindle and pack with grease
8.) Pack bearing with grease put spindle back into housing and replace the nut on the end of the spindle.
9.)Wipe some grease in the gear housing and reassemble.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10126773
Manufacturer Part Number: 32-75-3030
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 32-75-3030 Milwaukee Spindle Gear")
_WW_1.gif "Part Location Diagram of 32-75-3030 Milwaukee Spindle Gear")
