Genuine Milwaukee replacement part Includes 1 carbon brush with wire lead attached, Sold individually • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Replacement part
Worked fine
Guest - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Fixed my problem
Perfect fit quick shipping
Guest - May 1, 2019
Verified Purchase
★★★★★
★★★★★
brush replacement
to find an exact part as original is great.
Guest - September 18, 2019
Verified Purchase
★★★★★
★★★★★
Brush replacement
The brushes arrived sooner than expected and are am exact fit
John - October 21, 2019
Verified Purchase
★★★★★
★★★★★
Great site. Love it! Parts worked great.
My husband has soooooooooo many old tools that it is great to find a place that he can get parts for them.......no one in town carries most of the replacement parts. I will definitely keep this site on hand.
Guest - November 26, 2019
Verified Purchase
★★★★★
★★★★★
Back up and running in no time at all!
The parts needed (csrbon brushes) were easy to find on the website. They were easy to order. They arrived quickly. We used three sets to fix three grinders and had them up and running quickly. We kept three spare sets for the next time they need replacing. Sweet!
James K - March 3, 2020
Verified Purchase
★★★★★
★★★★★
Worked perfect
Thanks folks.
Guest - August 22, 2022
Verified Purchase
★★★★★
★★★★★
Carbon brush- only one
Part received good,but only one brush came in the package. I thought I purchased two, as it was not clear on the description, and normally two come together. Not happy!
Guest - April 16, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the rear cover
2. Pulled one of the brush mounts loose and unplugged the lead
3. Removed the old brush from assembly
4. Installed the new brush and replaced mount
5. Repeated steps 2 thru 4 for second brush mount assembly
6. Replaced cover
7. Tested
Unscrewed the housing.
Remove the switch.
Disconnect the wires from the switch.
Remove and replace the brushes.
Put new fittings on the cord and attach to the switch.
Reposition the switch.
Reposition the housing and replace the screws.
1. Disassembled the grinder and removed broken parts.
2. Assembled new brushes in the holders with the new springs.
3. Installed brush and holder assembly in the grinder properly.
4. Installed handle cover and secured with screws making sure the rubber bumpers were on the brush holders properly.
5. Plugged in grind
... Read moreer and did test run. all was normal.
Thanks
on the backend of the grinder is a door to get into the brushes and switch. I removed the door and found one of the brushes and the holder were out of location. I proceded to reove the brush and tholder for the ight side. The brush was bad, but the holder was OK. I replaced the brush and reinstalled the holder correctly and replaced t
... Read morehe door. test ran the grinder and it was OK.
Read less
Did you find this story helpful?
Thank you for voting!
Carbon brushes were worn out. The grinder wouldnGÇÖt run.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-18-0710 Milwaukee Carbon Brush")
_WW_1.gif "Part Location Diagram of 22-18-0710 Milwaukee Carbon Brush")
