Part Location Diagram of 22-18-0126 Milwaukee Carbon Brush
See part 61 in the diagram
Replacing your Milwaukee Sander Grinder Carbon Brush
( Grid squares measure 1x1 inch )

Carbon Brush 22-18-0126

Manufactured by:
Milwaukee
ERP Number:
ERP10122149
Part Number:
22-18-0126
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This Genuine OEM Milwaukee Carbon replacement part is Sold Individually. Due to continuous contact with Armature carbon brushes need to be inspected periodically and need to be replaced if they are worn. Carbon motor brushes are one of the most commonly replaced power tool parts. Please Note: Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Sander Grinder
  • Angle Grinder
  • Sander Polisher

Videos For installing this part.

?
Replacing your Carbon Brush

Customer Part Reviews

?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bad switch & brushes

Paul from WACO, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
23-66-2726, 22-18-0126
Changed out the brushes & switch
Did you find this story helpful?
Thank you for voting!

Brushes where burnt out

Richard from SHERBURNE, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
22-20-0120, 22-18-0126
Had to dissemble hand grinder replace 1 brush holder do to the spring that pushed the brush against the armature was bad and other side just the brush needed replacement
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10122149
Manufacturer Part Number: 22-18-0126
Brand Model Number Description
Milwaukee 6080-20 Sander Polisher - 7"/9" Sander
Milwaukee 6081-20 Sander Polisher - 7"/9" Sander
Milwaukee 6082-20 Sander Polisher - 7"/9" Sander
Milwaukee 6086-20 Sander Grinder - 9&#34 Grinder
Milwaukee 6088-20 Sander Grinder - 7" Grinder
Milwaukee 6088-30 Sander Grinder - Grinder
Milwaukee 6088-31 Sander Grinder - Grinder
Milwaukee 6089-20 Sander Grinder - 9" Grinder
Milwaukee 6089-30 Sander Grinder - Grinder
Milwaukee 6089-31 Sander Grinder - Grinder
Milwaukee 6185-20 Chop Saw - 14 in. Handheld Cut-Off Machine