Part Location Diagram of 316046900 Metabo Carbon Brush Set Cut-off
See part A-27 in the diagram
( Grid squares measure 1x1 inch )

Carbon Brush Set Cut-off 316046900

Manufactured by:
Metabo
ERP Number:
ERP10416486
Part Number:
316046900
Original Equipment Manufacturer ?
  Works with your model  GE710COMPACT!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(17 rated repairs) ?
  Works with your model   GE710COMPACT!

Product Description

?

This is a genuine Metabo replacement part, it is sold as a set (2). Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Troubleshooting

This part works with the following brands:
  • Metabo HPT
This part works with the following products:
  • Sander Grinder
  • Angle Grinder
  • Beveler
  • Miscellaneous
Part# 316046900 replaces these:
316046900,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(10 Reviews)
Click to filter by ratings:
  • 5 stars
    10
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(17 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced brushes in 4 1/2\" grinders

Jeff from howell, New Jersey

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
316046900
Remove body screws, split grinder body, lift brush spring off of brushes, pull brushes out, disconnect brushes wire connector, reassemble in reverse order
Did you find this story helpful?
Thank you for voting!

Damaged power cord

Lee from Casper, Wyoming

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
344492750, 344100970, 316046900
1. Disassemble case
2. Replace brushes
3. Solder wire ends on new power cord
4. Test run
5. Check for voltage \"leakage\" from tool body with multi-meter
Did you find this story helpful?
Thank you for voting!

Switch failed and shaft lock button needed replacemnt. It fell off and was lost, so couldn\'t be put back on.

Dean from Hudson, Wisconsin

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
The tool housing is easily dismantled. Switch part is a simple plug in part with stab in electrical wire connections. I replaced the brushes as a preemptive measure. Pop the old ones out and pop the new ones in. Needle nose pliers are helpful.
Did you find this story helpful?
Thank you for voting!

The brushes wore out

James from American Falls, Idaho

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
316046900
Removed old brushes and replaced with new.
Did you find this story helpful?
Thank you for voting!

My metabo grinder quit running in the middle of use

chris from north tazewell, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
623934000, 343409440, 316046900
I ordered new carbon brushes and a switch. I change them out and the grinder works great. I picked a spanner wrench also because I was in need of one.
Did you find this story helpful?
Thank you for voting!

Would not turn on anymore

Roger from Lafayette, Oregon

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
343409440, 316046900
Took grinder apart. keep track of your parts and screws. I took pictures since this was the first time for me. Found the switch was broken. Ordered new switch and decided to order brushes at the same time \"just in case\". That turned to be a good decision as once I saw the new brushes I realized that the old ones were just about done. The extra $6-7 bucks was well worth it.
Installed the new parts and put the grinder back together. Turns on and runs perfectly!
thanks eReplacementParts!

RJ
Did you find this story helpful?
Thank you for voting!

Brushes were wore out and cord was cut

Lynn from York Springs, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
344492750, 316046900
1. removed switch housing with torx driver
2. lifted brush spring with small screwdriver
3. pulled brush out with a pair of needle nose pliers
4. replaced brushes with new ones
5. remove screws from switch and pull out cord
6. strip cord to the correct length
7. solder ends of cord
8. replace cor d
9. replace switch cover
Did you find this story helpful?
Thank you for voting!

Brushes worn out

Francis from Granite city, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
316046900
With grinder unplugged. Removed screws from rear case and removed case halves. Used small GÇ£lGÇ¥ shaped pick to unplug brushes. Used same pick to pull retainer springs from brushes and rested spring ends at one side of brush holders. Removed old brushes. Inserted new brushes in holders and put spring ends back on top of brushes. Plugged each brush back onto connectors. Reassembled and screwed rear case back together. Plugged grinder into receptacle and turned it on. Checked operation, OK.
Did you find this story helpful?
Thank you for voting!

Power cord jacket starting to crack open.

Tommaney from Kirtland, New Mexico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
344492750, 344100970, 316046900
Took the covers off just the half on my grinder, blew out all the fine dust accumulation in the housing with air compressor and replace the power cord and brushes, now its is as good as new almost.
Did you find this story helpful?
Thank you for voting!

Brushes wore out

Paul from Fort Worth, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
316046900
1 Disassembled grinder
2 Cleaned all parts
3 Inspected all parts
4 Lubed gears
5 Replaced brushes
6 Replaced all covers and tested
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP10416486
Manufacturer Part Number: 316046900
Brand Model Number Description
Metabo HPT ANTRIEBSMOTORIK Sander Grinder - 99
Metabo HPT FME737 Router - Eu 230v
Metabo HPT GE710COMPACT Sander Grinder - Cn 220v
Metabo HPT GE710PLUS Sander Grinder - Ch 230v
Metabo HPT GE710Plus Angle Grinder - 6.4 Amp Die Grinder
Metabo HPT GE950GPLUS Sander Grinder - Ch 230v
Metabo HPT GE950GPlus Angle Grinder - Straight Grinder
Metabo HPT GEP710PLUS Sander Grinder - Gb 110v
Metabo HPT GEP950GPLUS Sander Grinder - Gb 110v
Metabo HPT KFM9-3RF Beveler - Au 240v
Metabo HPT KNSE9-150 Belt or Drum Sander - Eu 230v
Metabo HPT KNSE9-150SET Belt or Drum Sander - Us 120v
Metabo HPT LSV5-225 Miscellaneous - Ch 230v
Metabo HPT LSV5-225COMFORT Miscellaneous - Ch 230v
Metabo HPT OFE738 Router - Eu 230v
Metabo HPT RF14-115 Miscellaneous - Us 120v
Metabo HPT RS14-125 Miscellaneous - Us 120v
Metabo HPT WBE700 Drill - Eu 230v
Metabo HPT WEF Angle Grinder - Small Angle Grinder
Metabo HPT WEF9-125 Angle Grinder - Us 120v
Metabo HPT WEF9-125QUICK Angle Grinder - Eu 230v
Metabo HPT WEPF9-125 Angle Grinder - Us 120v
Metabo HPT WEPF9-125QUICK Angle Grinder - Eu 230v
Metabo HPT WP8-115QUICKPROTECT Angle Grinder - Eu 230v
Metabo HPT WQ1400 Angle Grinder - Gb 110v