1. Remove the old/worn graphite pad with a razor blade scraper and acetone.
2. Remove Start and Run capacitors: Unplug sander. Remover disc tool rest. Raise the sander on the disc end and secure from tipping, remove the bottom cover, the caps are visible and easy to replace.
3. Install the capacitors in their original brackets
... Read more and connect. One cap\'s wires needed to be cut. Crimp-on wire connectors worked-wire nuts could be used though.
4. Install the new graphite pad, very easy to align.
5. Reassemble, install tool rest, plug-in, install sanding belt over graphite pad, start the sander and adjust tracking.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19157267
Manufacturer Part Number: JT9-JSG96-102A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-JSG96-102A Jet STARTING CAPACITY JSG96")
_WW_1.gif "Part Location Diagram of JT9-JSG96-102A Jet STARTING CAPACITY JSG96")
