First you need to get on your hands and knees and look under the control panel where the power switch is. The conveyor is coupled to the motor and this is where you need to use the Allen key to remove the coupling...otherwise you can\'t take the panel off hopefully the conveyor and motor stopped so you can SEE the Allen screws to remove
... Read morethem...if not then you\'ll need to take the entire conveyor assembly off so you can rotate the coupling
Once this is done then 6 screws are taken out of the box and you\'ll see the control board mounted to this box. Remove the board remember to take pictures of the wire connections and that is it
Remove the old control board, and exchange the leads one at a time placing the leads from the old board on the same terminals of the new board. Then replace board.
Cut one corner on the controller box so I could get into box without having to remove whole machine from mounting. After that it was pretty easy to complete the job. Bad design on the box!
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of JT9-72-2250 Jet SANDSMART CONTROLLER")
_WW_2.gif "Part Location Diagram of JT9-72-2250 Jet SANDSMART CONTROLLER")
