Part Location Diagram of 911801 DeWALT INSERT HEXAGONAL
See part 66 in the diagram
( Grid squares measure 1x1 inch )

INSERT HEXAGONAL 911801

Manufactured by:
DeWALT
ERP Number:
ERP18989704
Part Number:
911801
Original Equipment Manufacturer ?
  Works with your model  895PK!
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(3 rated repairs) ?
  Works with your model   895PK!

Product Description

?

The insert goes next to the retaining ring. This part is available as an individual replacement part. This is an original Porter Cable and Black & Decker part for use in routers. A set of pliers might be needed during the installation process. This part is made out of metal and will need to be replaced if it breaks.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Porter Cable
  • Black and Decker
This part works with the following products:
  • Router
Part# 911801 replaces these:
911801, P911801,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

An e-clip failed and allowed the retained part to be lost... A small but critical part of the clamp on the router base.

Brad from North Fork, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
911801, 911804
No instructions other than the parts list and parts diagram provided on eRlacementparts web site. Thanks for a quick solution and a user friendly site for guys like me.
This was a \"five minute job\" that only took five minutes. I can\'t express how valuable that is...
Thanks
Did you find this story helpful?
Thank you for voting!

The aluminum clamp is too soft should someone try to unlock and already unlocked clamp. The same is true for locking an already locked clamp. It should be made of steel

Dale from CLEVER, Missouri

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
911801, 911799, A22702
I just replaced the axle, insert and clamp. But it could happen again as the clamp is out of sight under the router table.
Did you find this story helpful?
Thank you for voting!

The above the table tool no longer opened the clamp on table mounted router

Reid from COLUMBIA, Maryland

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
911801, 911799
1. Using star screwdriver removed large machine screw via hole in open clamp.
2. Removed insert and clamp fell off axle. Examined both pieces for wear that would explain the problem. Both looked pretty good.
3. Put axle in place. Slipped clamp over it and inserted machine screw part way.
4. Placed insert through hex sh ape hole in clamp and into axle and tightened machine screw
5. Closed and opened clamp several times and adjusted tightness of machine screw. Can only access screw with clamp open so some trial and error.
6. Tested above table tool - didn\'t work. Realized problem was wear of hex shaped hole in clamp.
7. Ordered new clamp from eReplacementparts
8. Installed new clamp as above. Works perfectly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18989704
Manufacturer Part Number: 911801
Brand Model Number Description
Porter Cable 890 Router - Router
Porter Cable 8901 Router - Fixed Router Base
Porter Cable 891 Router - 2-1/4HP GripVac Router
Porter Cable 892 Router - 2-1/4HP Fixed Base Router
Porter Cable 892DT Router - 892 & 4212 Combo Kit
Porter Cable 893 Router - 2-1/4HP Multi-Base Router
Porter Cable 8931 Router - Plunge Router Base
Porter Cable 893PK Router - 2-1/4 Fb+pb Kit
Porter Cable 893PKL Router - 893pk W/ Height Adjustor
Porter Cable 894 Router - 2-1/4HP Multi-Base GripVac Router
Porter Cable 894PK Leaf Blower / Vacuum - 2-1/4 Pb+fb+grip Vac
Porter Cable 895 Router - 2-1/4HP with Router Table Height Adjuster Multi-Base Router
Porter Cable 895PK Router - Router