INSERT HEXAGONAL 911801
- Manufactured by:
- DeWALT
- ERP Number:
- ERP18989704
- Part Number:
- 911801
Jump to:
Product Description
?The insert goes next to the retaining ring. This part is available as an individual replacement part. This is an original Porter Cable and Black & Decker part for use in routers. A set of pliers might be needed during the installation process. This part is made out of metal and will need to be replaced if it breaks.
Frequently Purchased Together
?Troubleshooting
- Porter Cable
- Black and Decker
- Router
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
An e-clip failed and allowed the retained part to be lost... A small but critical part of the clamp on the router base.
Brad from North Fork, California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
This was a \"five minute job\" that only took five minutes. I can\'t express how valuable that is...
Thanks
The aluminum clamp is too soft should someone try to unlock and already unlocked clamp. The same is true for locking an already locked clamp. It should be made of steel
Dale from CLEVER, Missouri
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
The above the table tool no longer opened the clamp on table mounted router
Reid from COLUMBIA, Maryland
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
2. Removed insert and clamp fell off axle. Examined both pieces for wear that would explain the problem. Both looked pretty good.
3. Put axle in place. Slipped clamp over it and inserted machine screw part way.
4. Placed insert through hex sh ... Read more ape hole in clamp and into axle and tightened machine screw
5. Closed and opened clamp several times and adjusted tightness of machine screw. Can only access screw with clamp open so some trial and error.
6. Tested above table tool - didn\'t work. Realized problem was wear of hex shaped hole in clamp.
7. Ordered new clamp from eReplacementparts
8. Installed new clamp as above. Works perfectly.
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 911801
| Brand | Model Number | Description |
|---|---|---|
| Porter Cable | 890 | Router - Router |
| Porter Cable | 8901 | Router - Fixed Router Base |
| Porter Cable | 891 | Router - 2-1/4HP GripVac Router |
| Porter Cable | 892 | Router - 2-1/4HP Fixed Base Router |
| Porter Cable | 892DT | Router - 892 & 4212 Combo Kit |
| Porter Cable | 893 | Router - 2-1/4HP Multi-Base Router |
| Porter Cable | 8931 | Router - Plunge Router Base |
| Porter Cable | 893PK | Router - 2-1/4 Fb+pb Kit |
| Porter Cable | 893PKL | Router - 893pk W/ Height Adjustor |
| Porter Cable | 894 | Router - 2-1/4HP Multi-Base GripVac Router |
| Porter Cable | 894PK | Leaf Blower / Vacuum - 2-1/4 Pb+fb+grip Vac |
| Porter Cable | 895 | Router - 2-1/4HP with Router Table Height Adjuster Multi-Base Router |
| Porter Cable | 895PK | Router - Router |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.