Part Location Diagram of 911799 DeWALT CLAMP AXLE
See part 161 in the diagram
( Grid squares measure 1x1 inch )

CLAMP AXLE 911799

Manufactured by:
DeWALT
ERP Number:
ERP18989702
Part Number:
911799
Original Equipment Manufacturer ?
$6.67
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Porter Cable and Black & Decker replacement part that has been sourced to be used with routers. The metal axle is used to mount the lock lever to the base of the router. This item will require a torx driver to install and is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Porter Cable
  • Black and Decker
This part works with the following products:
  • Router
Part# 911799 replaces these:
911799, P911799,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The aluminum clamp is too soft should someone try to unlock and already unlocked clamp. The same is true for locking an already locked clamp. It should be made of steel

Dale from CLEVER, Missouri

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
911801, 911799, A22702
I just replaced the axle, insert and clamp. But it could happen again as the clamp is out of sight under the router table.
Did you find this story helpful?
Thank you for voting!

The above the table tool no longer opened the clamp on table mounted router

Reid from COLUMBIA, Maryland

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
911801, 911799
1. Using star screwdriver removed large machine screw via hole in open clamp.
2. Removed insert and clamp fell off axle. Examined both pieces for wear that would explain the problem. Both looked pretty good.
3. Put axle in place. Slipped clamp over it and inserted machine screw part way.
4. Placed insert through hex sh ape hole in clamp and into axle and tightened machine screw
5. Closed and opened clamp several times and adjusted tightness of machine screw. Can only access screw with clamp open so some trial and error.
6. Tested above table tool - didn\'t work. Realized problem was wear of hex shaped hole in clamp.
7. Ordered new clamp from eReplacementparts
8. Installed new clamp as above. Works perfectly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18989702
Manufacturer Part Number: 911799
Brand Model Number Description
Porter Cable 890 Router - Router
Porter Cable 8901 Router - Fixed Router Base
Porter Cable 891 Router - 2-1/4HP GripVac Router
Porter Cable 892 Router - 2-1/4HP Fixed Base Router
Porter Cable 892DT Router - 892 & 4212 Combo Kit
Porter Cable 893 Router - 2-1/4HP Multi-Base Router
Porter Cable 8931 Router - Plunge Router Base
Porter Cable 893PK Router - 2-1/4 Fb+pb Kit
Porter Cable 893PKL Router - 893pk W/ Height Adjustor
Porter Cable 894 Router - 2-1/4HP Multi-Base GripVac Router
Porter Cable 894PK Leaf Blower / Vacuum - 2-1/4 Pb+fb+grip Vac
Porter Cable 895 Router - 2-1/4HP with Router Table Height Adjuster Multi-Base Router
Porter Cable 895PK Router - Router