Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
18987155-1-M-DeWALT-862641-NUT
Part Location Diagram of 862641 DeWALT NUT
See part 102 in the diagram
( Grid squares measure 1x1 inch )
18987155-1-S-DeWALT-862641-NUT Part Location Diagram of 862641 DeWALT NUT

NUT 862641

Manufactured by:
DeWALT
ERP Number:
ERP18987155
Part Number:
862641
Original Equipment Manufacturer ?
  Works with your model  J-587!
$6.16
On Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   J-587!

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Porter Cable
  • Milwaukee
  • Black and Decker
  • DeVilbiss
  • Delta
This part works with the following products:
  • Router
  • Electric Drill
  • Circular Saw
  • Reciprocating Saw
  • Sander Polisher
  • Sander Grinder
  • Boring Machine
  • Drill
Part# 862641 replaces these:
862641, P862641,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Nothing it was a upgrade to my router so i could have dust collection

Jonathan from EVERETT, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
A21564, 910600, 862641, 802596, A23123, 909243
1. I took off the right nob off my router base then i took the little plastic cap off

2. Then i put the grip vac handle on and put the screw in and the washer/spacer then the nut and tightened it down then i did the other screw

3. Then i took the bottom base plate off of the router then put in the dust shroud th en put the face plate back on and tightened it down then i was done really easy.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18987155
Manufacturer Part Number: 862641
Brand Model Number Description
Porter Cable 1096 Sander - Rockwell Disc Sander
Porter Cable 304 Sander Polisher - 7&#34 Disc Sander
Porter Cable 305 Sander Polisher - Sander / Polisher
Delta 31-205 Table Saw - 8&#34 Table Saw
Porter Cable 315-1 Circular Saw - Circular Saw
Delta 34-695 Table Saw - 10&#34 Table Saw
Porter Cable 346-1 Circular Saw - Circular Saw
Porter Cable 348 Jig Saw - Bayonet Saw
Porter Cable 368 Circular Saw - Circular Saw
Porter Cable 368-1 Circular Saw - Circular Saw
Porter Cable 587 Circular Saw - Speedtronic Circular Saw
Porter Cable 603 Electric Drill - Porter Cable 603 Parts
Porter Cable 614 Hammer - Hammer Drill
Porter Cable 617 Circular Saw - Circular Saw
Porter Cable 627 Reciprocating Saw - 2-Speed Tiger Saw
Porter Cable 629 Sander Grinder - Porter Cable 629 Parts
Porter Cable 631 Electric Drill - 1/2&#34 D-Handle Drill
Porter Cable 632 Electric Drill - 1/2" D-Handle Drill
Porter Cable 633 Electric Drill - Electric Drill
Porter Cable 636 Drill - Rockwell Drill
Porter Cable 637 Reciprocating Saw - Variable Speed Tiger Saw
Porter Cable 660 Sander Polisher - Disc Sander / Polisher
Porter Cable 661 Sander Polisher - Disc Sander / Polisher
Porter Cable 662 Sander Polisher - Disc Sander / Polisher
Porter Cable 687 Circular Saw - Saw
Porter Cable 688 Circular Saw - Saw
Porter Cable 693 Router - Plunge Router
Porter Cable 6931 Router - Plunge Router
Porter Cable 693LRP Router - 1-3/4 HP Multi-Base Router
Porter Cable 693LRPK Router - 1-3/4 HP Plunge Router
NUT
$ 6.16
On Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖