SNAP-RING 823030
- Manufactured by:
- DeWALT
- ERP Number:
- ERP12492316
- Part Number:
- 823030
Jump to:
Product Description
?This is a genuine OEM sourced part that is intended to be used with routers from Porter Cable, Delta, and Black & Decker. The metal snap ring is part of the collet and nut assembly. This item is used to fasten the collet and nut together. This item can be purchased as a single item.
Troubleshooting
- Porter Cable
- DeVilbiss
- Craftsman
- Black and Decker
- DeWALT
- Router
Videos For installing this part.
?
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Misplaced the 1/2 collet and nut.
Arthur from Ancramdale, New York
Moulded cord at router end deteriorated.
Mark from Aromas, California
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
2 - remove cord moulded end capture clamp (2 T20 torx screws).
3 - cut black, white and green wires from existing crimp connections.
4 - cut to length same color wires on new cord.
5 - using 16 gauge crimp butt splices and crimping tool, connect new cord wire ... Read more s to router internal wires.
6 - install moulded cord clamp over new cord end (2 T20 screws)
7 - install plastic cover (2 Phillips screws).
8 - Insure on / off switch is in off position, plug in, turn on to test.
9 - In my case, I\'d lost the collet chuck snap ring nut retainer, so I also installed the new one provided (purchased by me).
Was given a Porter Cable router with 1/4\" collet only. Needed 1/2\" Collet.
Bill from Bethel, Vermont
On/off switch failed and bits sloped in the collet.
Kyle from Port Matilda, Pennsylvania
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Removed old collet nut. Struggled to remove old snap ring inside the collet nut, because I didnÆt have the snap ring pliers, and thought it would not be available locally. Later I found that Lowes did carry them and they cost only $15. Used the new snap rin ... Read more g pliers to remove the old snap ring and install the new. Easy!
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 823030
| Brand | Model Number | Description |
|---|---|---|
| Porter Cable | 1001-T2 | Router - Router |
| Porter Cable | 1001TY1 | Router - Router |
| Porter Cable | 1001TY2 | Router - Router |
| Craftsman | 113221740 | Table Saw - 10" Bench Top Table Saw |
| Craftsman | 113221741 | Table Saw - 10" Bench Table Top Saw |
| Craftsman | 113221770 | Table Saw - 10" Bench Top Table Saw |
| Porter Cable | 22-7519-60 | Router - 220v 3-1/4 Hp Router |
| Porter Cable | 2460-75192E | Router - 240v 75192 Router Motor W |
| Porter Cable | 290 | Router - Cordless Router |
| Porter Cable | 630 | Router - 1HP Router |
| Porter Cable | 6302 | Router - Router |
| Porter Cable | 670 | Router - Porter Cable 670-Type-1 Parts |
| Porter Cable | 6702 | Router - Router Motor |
| Porter Cable | 690 | Router - Fixed Base Router |
| Porter Cable | 6902 | Router - Router Motor |
| Porter Cable | 6902-T7 | Router - Router |
| Porter Cable | 6902-T8 | Router - Router |
| Porter Cable | 6902VS | Router - Vs Router Motor Only |
| Porter Cable | 690LR | Router - Fixed Base Router |
| Black and Decker | 690LRP | Router - 1-3/4 HP Router |
| Porter Cable | 690LRVS | Router - Fixed Base Variable Speed Router |
| Porter Cable | 691 | Router - D Handle Router |
| Porter Cable | 6911 | Router - D Handle Route Base |
| Porter Cable | 6912 | Router - D Handle Router |
| Porter Cable | 693LRP | Router - 1-3/4 HP Multi-Base Router |
| Porter Cable | 693LRPK | Router - 1-3/4 HP Plunge Router |
| Porter Cable | 694 | Router - 1-3/4 HP Variable-Speed Multi-Base Router |
| Porter Cable | 694917 | Router - D Handle Router |
| Porter Cable | 694VK | Router - 1-3/4 Hp Vs Rout Kit |
| Porter Cable | 7518 | Router - Fixed Base Router |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.