Part Location Diagram of 823030 DeWALT SNAP-RING
See part B-25 in the diagram
Replacing your Porter Cable Router SNAP-RING
( Grid squares measure 1x1 inch )

SNAP-RING 823030

Manufactured by:
DeWALT
ERP Number:
ERP12492316
Part Number:
823030
Original Equipment Manufacturer ?
  Works with your model  691!
$5.95
On Order

Easy 

Less than 15 mins 

(4 rated repairs) ?
  Works with your model   691!

Product Description

?

This is a genuine OEM sourced part that is intended to be used with routers from Porter Cable, Delta, and Black & Decker. The metal snap ring is part of the collet and nut assembly. This item is used to fasten the collet and nut together. This item can be purchased as a single item.

Troubleshooting

This part works with the following brands:
  • Porter Cable
  • DeVilbiss
  • Craftsman
  • Black and Decker
  • DeWALT
This part works with the following products:
  • Router
Part# 823030 replaces these:
823030, P823030,

Videos For installing this part.

?
Replacing your SNAP-RING

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Misplaced the 1/2 collet and nut.

Arthur from Ancramdale, New York

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
A22709, 875893, 823030, 876671
Just put the new collet and the nut on the router.
Did you find this story helpful?
Thank you for voting!

Moulded cord at router end deteriorated.

Mark from Aromas, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
A11126, 823030
1 - remove router top plastic cover (2 Phillips screws).
2 - remove cord moulded end capture clamp (2 T20 torx screws).
3 - cut black, white and green wires from existing crimp connections.
4 - cut to length same color wires on new cord.
5 - using 16 gauge crimp butt splices and crimping tool, connect new cord wire s to router internal wires.
6 - install moulded cord clamp over new cord end (2 T20 screws)
7 - install plastic cover (2 Phillips screws).
8 - Insure on / off switch is in off position, plug in, turn on to test.
9 - In my case, I\'d lost the collet chuck snap ring nut retainer, so I also installed the new one provided (purchased by me).
Did you find this story helpful?
Thank you for voting!

Was given a Porter Cable router with 1/4\" collet only. Needed 1/2\" Collet.

Bill from Bethel, Vermont

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
875893, 823030, 876671
1/2\" collet assbly out of stock so bought components and assembled.
Did you find this story helpful?
Thank you for voting!

On/off switch failed and bits sloped in the collet.

Kyle from Port Matilda, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
876669, 823030, A22756
Removed the top and power switch. Installed switch. Replaced cover.

Removed old collet nut. Struggled to remove old snap ring inside the collet nut, because I didnÆt have the snap ring pliers, and thought it would not be available locally. Later I found that Lowes did carry them and they cost only $15. Used the new snap rin g pliers to remove the old snap ring and install the new. Easy!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12492316
Manufacturer Part Number: 823030
Brand Model Number Description
Porter Cable 1001-T2 Router - Router
Porter Cable 1001TY1 Router - Router
Porter Cable 1001TY2 Router - Router
Craftsman 113221740 Table Saw - 10" Bench Top Table Saw
Craftsman 113221741 Table Saw - 10" Bench Table Top Saw
Craftsman 113221770 Table Saw - 10" Bench Top Table Saw
Porter Cable 22-7519-60 Router - 220v 3-1/4 Hp Router
Porter Cable 2460-75192E Router - 240v 75192 Router Motor W
Porter Cable 290 Router - Cordless Router
Porter Cable 630 Router - 1HP Router
Porter Cable 6302 Router - Router
Porter Cable 670 Router - Porter Cable 670-Type-1 Parts
Porter Cable 6702 Router - Router Motor
Porter Cable 690 Router - Fixed Base Router
Porter Cable 6902 Router - Router Motor
Porter Cable 6902-T7 Router - Router
Porter Cable 6902-T8 Router - Router
Porter Cable 6902VS Router - Vs Router Motor Only
Porter Cable 690LR Router - Fixed Base Router
Black and Decker 690LRP Router - 1-3/4 HP Router
Porter Cable 690LRVS Router - Fixed Base Variable Speed Router
Porter Cable 691 Router - D Handle Router
Porter Cable 6911 Router - D Handle Route Base
Porter Cable 6912 Router - D Handle Router
Porter Cable 693LRP Router - 1-3/4 HP Multi-Base Router
Porter Cable 693LRPK Router - 1-3/4 HP Plunge Router
Porter Cable 694 Router - 1-3/4 HP Variable-Speed Multi-Base Router
Porter Cable 694917 Router - D Handle Router
Porter Cable 694VK Router - 1-3/4 Hp Vs Rout Kit
Porter Cable 7518 Router - Fixed Base Router