Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Flawless installation in 2 minutes.
Prop perfect fit, I only added brushes as shipping cost are high and good to have newies. When my old prop disintegrated the brushes got a hit too.
Well done Ereplacement folks.
Shipping costs are depressing but that’s a fact of life when you decide to retire in a place where I am now.
Iglobal - October 4, 2019
Verified Purchase
★★★★★
★★★★★
Fast service
Easy, peasy! Got what I needed quickly and tool now working again!
William - March 25, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Opened the case and removed the brushes. It was not to difficult but getting the brush out of its rubber housing was a bit tricky and required patience and a couple of small probes and small screwdriver. Had to re-solder the the new brush in. Put it back in the case and screwed it back together. It works fine now.
Did you find this story helpful?
Thank you for voting!
Cord was stripped and brushes were worn out - drill was given to me
1. Removed side case (drill unplugged)
2. Removed retaining brackets on cord positive and negative terminals on switch housing. (Noted which was positive/negative for new cord)
3. Removed cord retention gate at bottom of drill housing.
4. Disposed of damaged cord/old cord guard.
5. Placed new guard and cord into ch
... Read moreannel and secured with retention gate.
6. Snipped positive/negative ends of new cord to correct length and placed ends into corresponding terminals on switch housing, secured with screws.
7. Removed and replaced brush magnets using screwdriver.
8. Double checked all was in order, re-seated case and screwed it down.
9. Performed test of drill to confirm correct installation, checked forward and reverse function, speed adjustment, and gearbox selection.
10. Done!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10156638
Manufacturer Part Number: CB107
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
