Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Works If You want to Wait to Receive
Part work as expected but took way too long to receive. I was within a couple days of cancelling the order. From order placement to receiving took 1 month.
Guest - July 12, 2019
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The armature/field was shorting, due to a worn bearing
1. Remove the 2 Carbon Brushes
2. Remove the 4 Torx Screws and the front Cap.
3. Separate the top and bottom halves of the Shell.
4. Take clear photos of the Armature + Field + Switch units in the shell, BEFORE removing them.
5. Gently pull out the Armature + Field + Switch units from the shell.
6. From an ol
... Read mored Bike inner tube, cut 2 pieces of rubber 7mm x 30mm.
7. Look carefully at the circular outer form of the Field unit. You will see that it is perfectly round, except for 2 FLAT areas, located 180-¦ from each other. Glue the 2 pieces of rubber onto the 2 FLAT metal surfaces. These provide a cushion between the Field and the outer Shell to prevent vibrations.
8. Assemble the new Armature + Field + Switch into the shell, in the same way as they were previously, referencing your photos.
9. Close up the 2 shell halves, and secure with the 4 Torx screws.
10. Replace the Carbon Brushes.
11. Connect to AC Power and Test.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10260566
Manufacturer Part Number: 2615298792
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2615298792 Dremel Field 230v")
_WW_1.gif "Part Location Diagram of 2615298792 Dremel Field 230v")
