This electronic speed switch is a high quality item that is sourced directly from original equipment manufacturer for use on Dremel rotary tools. It allows user to adjust the speed of the tool by turning the wheel. Please note one switch is included per order that will require a screwdriver set to replace it.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect
Instaled and work like new
Guest - April 19, 2019
Verified Purchase
★★★★★
★★★★★
Correct part! Worked great!
Thanks
Guest - November 16, 2019
Verified Purchase
★★★★★
★★★★★
easy repair that save me from replacement
The perfect part replacement
Mitchel - March 30, 2020
Verified Purchase
★★★★★
★★★★★
Works like charm!
Easy to install using a youtube video. All in, took about 10 minutes. Product works great!!!
Guest - June 2, 2020
Verified Purchase
★★★★★
★★★★★
Dremel speed switch
This part was exactly what I needed to get my Dremel 4000 back to operating like new. No more pulsing spindle speed. The online instillation video was helpful also.
Guest - September 1, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Open the tool. Take out old the switch assembly. Make sure all wires clear closing of housing. Put back the way you took it out. Close and plug in turn on. If not working still recheck all wire connections.
Did you find this story helpful?
Thank you for voting!
Dremel stopped working and wouldn\'t turn back on.
My dremel 4000 stopped working in between uses while trying to complete a project. Nothing out of the ordinary happened like overheating so I decided to try the switch replacement.
The replacement was of medium difficulty because the wires more or less have to be put back exactly where they were before in order to get the uni
... Read moret back together again. Take lots of pictures as you slowly take it apart to see where they should go when you\'re putting it back together. Also, YouTube has some good videos on how to do it as well.
1. Remove nose collar, motor brush spring plugs and brushes, and the 6 (?) case screws.
2. Lift off half the case. You must note the position of the wires, and spindle lock and spring.
3. Unscrew/remove plug wire from circuit board.
4. Remove speed controller board - note wire routing to motor. Lifting of the motor out
... Read moreof place will help.
5.Install new controller and assemble tool in reverse order. Ensure motor spins freely before assembly of case. Don\'t forget the spindle lock and spring, The clear plastic dial guard will re-install and fit perfectly so keep at it until it does. Do not over tighten case screws.
Read less
Did you find this story helpful?
Thank you for voting!
The unit locked up 10 yrs ago while cutting aluminum
1. Disassembled unit
2. Wire power cord to new switch assembly
3. Attached brush holders to field
4. Attached field to switch
5. Routed wires to specific points so unit will close and run
6. Place all button and lock knobs in place.
7. Reassembled unit
(Pay Close Attention To Where The Wires Are
... Read moreRouted, if they are not just right the outer casing will not close cleanly and the motor will not run)
Removed brushes
Removed casing
Removed loose frame components
Popped the brush housing loose
Tipped motor out and removed old speed control
Follow the above steps in reverse
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10259911
Manufacturer Part Number: 2610004636
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
