Part Location Diagram of 42-68-0073 Milwaukee Blade Clamp
See part 28 in the diagram
( Grid squares measure 1x1 inch )

Blade Clamp 42-68-0073

Manufactured by:
Milwaukee
ERP Number:
ERP10129291
Part Number:
42-68-0073
Original Equipment Manufacturer ?
  Works with your model  6509!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(26 rated repairs) ?
  Works with your model   6509!

Product Description

?

This is a genuine Milwaukee replacement part and is sold individually. Its purpose along with the 06-75-2402 Blade Clamp Screw, is to clamp the blade to the reciprocating spindle of the Milwaukee Sawzall model numbers shown below. If the blade clamp is being replaced, it advisable to replace the blade clamp screw at the same time as they are both wear parts.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Reciprocating Saw
  • Saw

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(24 Reviews)
Click to filter by ratings:
  • 5 stars
    22
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(26 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Needed a blade clamp and locking bolt for Sawzall

AJ from Wilmington, Massachusetts

20 of 20 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
42-68-0073, 06-75-2402
Place the bolt into the hole of the clamp and screw into the threaded hole on the shaft of the Sawzall, making certain the plug is not plugged in.
Did you find this story helpful?
Thank you for voting!

Wouldn\'t hold a blade

Roy from Arlington, Texas

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
42-68-0073
Removed screw, replaced clamp, replaced screw. Too easy.
Did you find this story helpful?
Thank you for voting!

Blade clamp broke

William from Hertford, North Carolina

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
42-68-0073, 06-75-2402
Installed on saw shaft , then tightened allen screw
Did you find this story helpful?
Thank you for voting!

I installed a new blade clamp with a allen screw

Frederick from New Bedford , Massachusetts

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
42-68-0073, 06-75-2402
It was very easy to put new blade clamp in place and screw down tight with allen screw. All done.
Did you find this story helpful?
Thank you for voting!

Blade clamp lost and shoe bent.

Alfredo from new York, New York

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Very easy repair. Screw the blade clamp on the shaft with the screw. Then I replaced the shoe with the four screws still on the saw.
Did you find this story helpful?
Thank you for voting!

Part was missing

ted from Bellefontaine, Ohio

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
42-68-0073, 06-75-2402
Blade clamp fastens to reciprocal saw with screw. Holds blade in place during use. Parts fit perfectly.
Did you find this story helpful?
Thank you for voting!

Purchased a used Milwaukee sawzall. It had some missing and worn parts.

michael from west palm beach, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Installed a new boot by sliding it over the gear case. I then replaced the blade clamp by screwing it to the blade shaft. Replace the shoe by screwing two screws into the gear housing and slid it in and tightening the screws with the the hex key. Lastly I removed the brush caps and brush springs and replace the worn brushes. It\'s like ha ving a new sawzall. The parts arrived promptly, and were easy to install. Thanks,
Did you find this story helpful?
Thank you for voting!

Blade clamp and shoe broke

Joe from Port St. Lucy, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Unscrew remove and replace
Did you find this story helpful?
Thank you for voting!

Blade hold down screw stripped out

Martin from Rancho Cucamonga, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
42-68-0073, 06-75-2402
Replaced screw and clamp
Did you find this story helpful?
Thank you for voting!

Sawzall not cutting straight

David from Buffalo, New York

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Removed 4 Alan screws, removed old pivot shoe. Put new shoe in place and re-installed allen screws. Done
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP10129291
Manufacturer Part Number: 42-68-0073
Brand Model Number Description
Milwaukee 6500 Reciprocating Saw - Sawzall
Milwaukee 6505 Reciprocating Saw - Electronically Controlled Sawzall
Milwaukee 6506 Reciprocating Saw - Sawzall
Milwaukee 6507 Reciprocating Saw - Sawzall
Milwaukee 6507-20 Reciprocating Saw - Sawzall
Milwaukee 6507-21 Saw - Milwaukee 6507-21-(182a) Parts
Milwaukee 6507TYPEB Reciprocating Saw - Trigger Speed Control Sawzall
Milwaukee 6507TYPEC Reciprocating Saw - Trigger Speed Control Sawzall
Milwaukee 6507TYPEF Reciprocating Saw - Trigger Speed Control Sawzall
Milwaukee 6508 Reciprocating Saw - Sawzall
Milwaukee 6509 Reciprocating Saw - D.I. Sawzall
Milwaukee 6509TYPE808B Reciprocating Saw - Reciprocating Saw
Milwaukee 6510 Reciprocating Saw - Two-Speed Sawzall
Milwaukee 6511 Reciprocating Saw - Sawzall
Milwaukee 6511-2 Saw - Milwaukee 6511-2-(460-246188) Parts
Milwaukee 6512 Reciprocating Saw - Two Speed Double Insulated Sawzall
Milwaukee 6512-2 Saw - Milwaukee 6512-2-(483-25000) Parts
Milwaukee 6512-4 Reciprocating Saw - Sawzall
Milwaukee 6512-51 Saw - Milwaukee 6512-51-(600e) Parts
Milwaukee 6535 Reciprocating Saw - 12 Volt Sawzall
Milwaukee 6535-6 Reciprocating Saw - Sawzall
Milwaukee 6536 Saw - Milwaukee 6536-(384-1101) Parts