Part Location Diagram of 382191-01 DeWALT Shoe Assembly
See part 24 in the diagram
( Grid squares measure 1x1 inch )

Shoe Assembly 382191-01

Manufactured by:
DeWALT
ERP Number:
ERP10170355
Part Number:
382191-01
Original Equipment Manufacturer ?
  Works with your model  DW937!
$36.41
On Order

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   DW937!

Product Description

?

The shoe assembly connects to the gear case. It is made of metal and is sold individually. This part is an OEM from DeWALT for use in reciprocating saws. It may require a screwdriver during installation. Over time this part may break and will need to be replaced.

Troubleshooting

This part works with the following brands:
  • DeWALT
This part works with the following products:
  • Reciprocating Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Clam shell handle broken off at main body

marvin from columbus, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
613840-00, 382191-01
Removed one side of the clamshell and installed the parts from the old one into the new clamshell then installed on body of saw then placed opposite side over the end and added all torx bit screws . also replaced shoe portion where blade goes
Did you find this story helpful?
Thank you for voting!

shoe broke for saw. Now I can\'t saw with it.One screw broke off.

Gary from CHAMBERSBURG, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
382191-01, 142940-00
1. Drill hole in scrap metal and clamp it over broken screw. Weld through hole and onto broken screw. While it is hot turn screw out. Let cool down add antisise. Now set foot in place and add screws. Now it\'s working great.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10170355
Manufacturer Part Number: 382191-01
Brand Model Number Description
DeWALT DC380 Reciprocating Saw - Reciprocating Saw
DeWALT DC380K Reciprocating Saw - 18v Recip Saw
DeWALT DC385K Reciprocating Saw - 18V Cordless Recip Saw
DeWALT DCS381 Reciprocating Saw - 20V Reciprocating Saw
DeWALT DW937 Reciprocating Saw - Cordless Reciprocating Saw
DeWALT DW937K Reciprocating Saw - 20222
DeWALT DW938 Reciprocating Saw - 18V Cordless Reciprocating Saw
DeWALT DW938-ROT Reciprocating Saw - 18v Cordless Recip.Saw
DeWALT DW938K Reciprocating Saw - 18v Recip.Saw Kit
DeWALT DW938K-B2 Reciprocating Saw - Recip Saw
DeWALT DW938K-BR Reciprocating Saw - 18v Reciprocating Saw