This authentic OEM trigger handle is specially designed for use with pressure washers. It allows the user to control the pressure and flow of water during use. It has an ergonomically designed grip allowing for easy and longer handling. When the pull lever/trigger mechanism is squeezed, it activates the pump, and pressurized water is released through the nozzle. However, if the trigger handle is loose or damaged you will notice water leakage, loss of pressure, weak flow, or no flow at all. A damaged trigger may also cause water to flow continuously leading to wastage and potential safety hazards. Turn off the water supply, and disconnect the washer from power before beginning this repair. Remove the trigger handle from the holder at the end of the pressure washer wand and check the area for any clogs or damage. Place the new handle onto the holder and ensure it is securely fitted before restoring the water supply.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
as good as new
as good as new
Guest - June 11, 2019
Verified Purchase
★★★★★
★★★★★
Satisfied!
We borrowed our neighbors pressure washer and after using it for a bit the handle started leaking like crazy! We were happy to find an inexpensive replacement. My husband was able to fix the original handle afterwards.
Guest - August 14, 2019
Verified Purchase
★★★★★
★★★★★
Great service
The triger handle only worked for a couple of hours, but ereplacementparts sent me a new one right away. Top notch company.
Guest - December 9, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected !!
I was a bit Leary of ordering a non oem part. My choices were limited by the original manufacture. My part shipped, and arrived as expected. I ordered a replacement power washer trigger handle. I selected my model from a list, and it worked perfectly in my power washer.
Guest - April 18, 2020
Verified Purchase
★★★★★
★★★★★
Great experience
I ordered a part for my pressure cleaner. The price was good and the part was immediately shipped. Will order from them again.
Guest - May 7, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
It came in excellent condition and pressure washer works like new again
Guest - May 21, 2020
Verified Purchase
★★★★★
★★★★★
pressure washer wand
the wand for my pressure washer was leaking badly and needed replaced. The company that made the pressure washer was out of stock on the part but gave me the part number. I entered the part number on E Replacement Parts and placed my order. Easy and efficient, item was well packed so that the part came undamaged and on time.
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
exact factory part
i always like to buy an exact factory replacement parts and thats what i get from these guys , that along with fast and friendly service and shipping . great job
Guest - October 5, 2020
Verified Purchase
★★★★★
★★★★★
Worked perfectly
Worked perfectly thank you
Guest - May 24, 2021
Verified Purchase
★★★★★
★★★★★
Original valve was cracked and leaking
Took the valve out of the new handle and put it in the original handle. Pressure washer now works like new.
Guest - September 11, 2023
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the broken part of the wand from the handle.
I totally disassembled the broken part.
I found that I could not replace the small part that was broken, but had to buy the entire assembly.
I re-assembled the assembly.
I bought the new assembly,
When it arrived, I screwed the new assembly together.
<
... Read morebr />It worked.
Removed old handle from pressure handle. Put new handle in place using pipe tape to avoid future leaks. Tightened new handle and safely and quickly went back to pressure washing building. Total repair time 10 minutes.
Removed wand then removed hose from trigger assembly. Reinstalled with new trigger. Tip-do not store over winter with water in trigger unless it is inside where it won\'t freeze up
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18783946
Manufacturer Part Number: 308760071
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
