This is a genuine Karcher replacement part that has been sourced from the original manufacturer to be used with pressure washers. The rubber buffer attaches to the underside of the front bar of the frame. This item is used to absorb vibration between the frame and the ground. A screwdriver is needed to install this item.
Troubleshooting
This part works with the following brands:
Karcher
This part works with the following products:
Pressure Washer
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Used a vise grips on the shaft of a large Phillips screw driver to break loose the pan head bolt that holds the buffer on the frame of the pressure washer. The bolt was rusted and shot and I should of purchased that bolt also from you guys. I found a bolt that works at local ACE hardware store but took some time finding that type of bolt.
... Read more For anyone else I would suggest purchasing the bolt that holds the buffer on the frame when ordering a new rubber buffer. The buffer doesn\'t come with a new bolt.
Read less
Did you find this story helpful?
Thank you for voting!
Rubber \"feet\" worn down to the point that the mounting bolts were exposed
1) Removed existing bolts with socket wrench while holding nuts from below with long-nose Vice-Grips.
2) Enlarged mounting holes in frame with electric drill to fit bolts of mounting hardware on new rubber feet.
3) Bolted on new rubber \"feet\" and tightened nuts with socket wrench.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10020980
Manufacturer Part Number: 9.183-408.0
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 9.183-408.0 Karcher Rubber Buffer")
_WW_1.gif "Part Location Diagram of 9.183-408.0 Karcher Rubber Buffer")
