This item has been sourced from the original manufacturer to ensure a high level of quality. The inlet elbow is intended to be used with pressure washers from Karcher. The inlet elbow attaches to the pump assembly and is used to link the water hose. This item is sold as an individual replacement part.
Troubleshooting
This part works with the following brands:
Karcher
This part works with the following products:
Pressure Washer
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
easy to repair my power washer,fit as I expected
the part arrived quicker than I expected, Thank you for your expediance
Iglobal - July 13, 2019
Verified Purchase
★★★★★
★★★★★
This part was right.
The part came within a week and it was the right one. Thanks for helping us fix our pressure washer.
Guest - April 26, 2020
Verified Purchase
★★★★★
★★★★★
Parts fit great and work!
Every thing fit great! Functioned well! Shipping great under present conditions! Thanks will use you again!!
Iglobal - June 9, 2020
Verified Purchase
★★★★★
★★★★★
Great Part
The part was exactly as needed, thank you for the quick service.
Iglobal - June 26, 2020
Verified Purchase
★★★★★
★★★★★
Power washer repair.
Fit and worked as expected.
Guest - August 11, 2020
Verified Purchase
★★★★★
★★★★★
worked as expected
arrived quickly
Guest - March 29, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed screws attaching handle to the body.
2. Removed screws that hold shell together from underside of body. I think there were 6 of them.
3. Carefully split the case open by removing top portion. Lift out the entire motor assembly.
4. Remove 4 allen key bolts holding the metal \"cage\" covering the inlet val
... Read moreve assembly. Note how the inlet valve assembly latches onto the switch so you can reinstall it properly later.
5. Pull cage off. Inlet valve assembly must be removed from the cage. I inserted a small screwdriver through various slots and holes in the cage and carefully pried out the valve assembly. Mine came out quite easily.
6. Slide out the inlet elbow and slide in the new one. Reassemble everything.
Removed wheel assembly. Removed case. Remove switch assembly. Removed front assembly of pump. Removed elbow from assembly. Reinstalled front assembly to pump. This requires installing the socket hex bolts. They need to be turned by hand. As they tighten up, go to next bolt and turn it. This draws the assembly down and allows the pistons t
... Read moreo reseat. When all bolts are turning easily, finish tightening them with wrenches. Reinstall switch assembly. Reassemble case and wheel assembly.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10020510
Manufacturer Part Number: 9.001-187.0
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Pressure Washer","title":"Pressure Washer","url":"/parts/power-tool/pressure-washer/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/power-tool/pressure-washer/hoses-and-tubes/"},{"position":3,"name":"9.001-187.0","title":"9.001-187.0","url":""}]
_WW_3.gif "Part Location Diagram of 9.001-187.0 Karcher Inlet Elbow")
_WW_3.gif "Part Location Diagram of 9.001-187.0 Karcher Inlet Elbow")
