This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Wonderful experance
The parts were accurate .Will be shopping here again ..Great service fast shipping
Guest - May 17, 2019
Verified Purchase
★★★★★
★★★★★
power wash hose repair
part arrived a little ahead of schedule. I was able to complete a project that had been on hold. Your staff is always very helpful. Thanks.
Guest - July 3, 2019
Verified Purchase
★★★★★
★★★★★
Good prices, great customer service
I ordered an o-ring set for my power washer. The parts came promptly and fit perfectly. I had to contact customer service immediately after placing the order because I had mistakenly ordered three sets instead of two. The representative immediately made the adjustment for me. Great service
Ed - July 17, 2019
Verified Purchase
★★★★★
★★★★★
O-rings work
Fast service, no more leaky pressure washer hose leaks.
Randy - August 14, 2019
Verified Purchase
★★★★★
★★★★★
O Ring replacement on power washer
While power washing my driveway I found I was getting as wet as the concrete because of leaks caused my leaking hose connections. I found out I needed to replace the O rings which I did. Leaking was stopped.
Guest - September 3, 2019
Verified Purchase
★★★★★
★★★★★
The O-Ring Kit came on time & was the correct part.
The parts were received in great condition.
Guest - November 8, 2019
Verified Purchase
★★★★★
★★★★★
Exact replacement part
Received the exact replacement part needed for our pressure washer. Local parts dealer didn't have them. Shipping was in record time also.
Guest - September 1, 2020
Verified Purchase
★★★★★
★★★★★
worked great
arrived quickly
Guest - October 14, 2021
Verified Purchase
★★★★★
★★★★★
O-Rings
The service was great, got the parts fast and just what I needed.
Thanks Clayton
Guest - May 11, 2022
Verified Purchase
★★★★★
★★★★★
O Ring for power washer
The O-ring kit for our power washer was easy to find and easy to order. I have not replaced the original o-rings yet just getting ready for next spring/summer.
Guest - December 3, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the lower pump unit from the washer, disassembled it. I rebuilt both the pump and the relief valve assemblies. It was easy to determine which 0-ring went where just by the count. The kit supplied new allen screws. After re-assembly and new oil, the unit performed as new.
Remove three allen bolts holding compressor on. Lower and mark key placement for reinstallation. Remove debris from old sheared key and reinstall the new key. I replaced
all the O rings and lubed them before replacing the unit.
Did you find this story helpful?
Thank you for voting!
Threads worn out on pressure outlet pipe allowing pressure hose to \"pop off\".
Had to replace entire gun because trigger parts NA. So that was a simple matter of unscrewing old one and screwing new one on. Works fine. O-ring replacement was a different story. Color coding did me little good because the old O-rings aren\'t colored through and through. So a little guesswork but managed to get the right rings in t
... Read morehe right places. Pressure hose doesn\'t leak and pressure washer works great again.
Replaced the wand and the required o rings.
I have had this problem before with the wand not being able to maintain high pressure and was able to fix it by changing out the wand. So I did the same thing .
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10000585
Manufacturer Part Number: 705001
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Pressure Washer","title":"Pressure Washer","url":"/parts/power-tool/pressure-washer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/pressure-washer/seals-and-gaskets/"},{"position":3,"name":"705001","title":"705001","url":""}]
